Produce barrels using non-fired processes

Unit of competency Outline

Date retreived
23/07/2026 1:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFCP3001

State Code
OEL87

TGA Status
Current

DTWD Status
Approved

Current Release Number
1.00

Current Release Date
08/12/2022

View on TGA

State Implementation and Classification

Approved Date

19/04/2023

Field of Education

030199 - Manufacturing Engineering And Technology, N.e.c.

Original Release Date

19/04/2023

Nominal Hours

Description

This unit describes the skills and knowledge required to produce barrels using non-fired processes. It includes both manual and automated production methods. Workers with this competency follow established procedures using discretion, judgement and problem solving.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.

Notes

Elements and Performance Criteria

1. Choose appropriate materials

1.1 Analyse timber types and characteristics to identify appropriate timber for the barrel
1.2 Analyse metal types and characteristics to identify appropriate metal for the barrel

2. Determine the impact of barrel components and storage processes on contents

2.1 Identify effects of barrel fermentation, maturation and seasoning and controlled oxidisation on barrel and barrel contents.
2.2 Apply knowledge of barrel storage processes to barrel production

3. Prepare for production

3.1 Verify and comply with work health and safety (WHS) legislative and organisational requirements
3.2 Review, confirm and clarify work order with appropriate personnel
3.3 Plan barrel production sequence
3.4 Determine procedures for checking quality at each stage of the process
3.5 Select suitable work area for the task
3.6 Select tools and equipment suitable for the work and check they are safe and functional

4. Select and prepare components

4.1 Collect materials, hardware, fittings and attachments
4.2 Select fixing and joining devices in accordance with work instructions and type of materials to be joined
4.3 Select jigs, and check they are suitable for purpose
4.4 Machine and prepare components, including staves and heads, to specification

5. Assemble components

5.1 Lay out and join components using jigs and appropriate fastenings and clamping devices
5.2 Use hand and power tools and equipment as required
5.3 Check assembled components for compliance with specifications

6. Finish barrel

6.1 Line barrel according to specification
6.2 Test barrel for leakage and repair faults
6.3 Fit and secure decorative features or fittings to specification
6.4 Sand and prepare barrel for coating
6.5 Coat barrel in accordance with specification and intended commercial application

7. Clean work area and maintain equipment

7.1 Tag and report faulty and defective equipment in accordance with workplace procedures
7.2 Organise and store finished barrels in holding area
7.3 Remove waste and scrap following workplace procedures
7.4 Clean tools and equipment, check they are in serviceable condition, and store them in accordance with workplace procedures
7.5 Clean equipment and work area in accordance with workplace procedures
7.6 Complete records and reports to workplace requirements

No information

Replaces

State Code	National Code	Title	Type
WI273	MSFCP2002	Produce barrels using non-fired processes	Unit of competency

State Code	National Code	Title	Type
BIK0	MSF30322	Certificate III in Cabinet Making and Timber Technology	Qualification