Unit of competency Outline

Date retreived
22/07/2026 10:50 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply trimming adhesives

Apply trimming adhesives

Unit of competency
National Code
AURVTT006
State Code
AWZ15
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
12
Description
This unit describes the performance outcomes required to select and apply trim adhesives. It involves preparing for the task, including preparing surfaces, selecting and applying adhesives to specifications, removing excess adhesive, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply trim adhesives
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Adhesive specifications, application processes, and relevant safety data sheets (SDS) are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Prepare surfaces and apply adhesive
  • 2.1 Adhesive is selected according to manufacturer recommendation, trim and material type
  • 2.2 Surfaces are cleaned and prepared according to adhesive manufacturer specifications and SDS requirements
  • 2.3 Adhesive is applied to surfaces using adhesive application tools and equipment and according to workplace procedures and safety and environmental requirements
3. Complete work processes
  • 3.1 Final adhesive selection is made and presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF558 AURVTT2006 Select and apply trim and fabric adhesives Unit of competency