Unit of competency Outline

Date retreived
23/07/2026 1:14 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor and implement dam maintenance

Monitor and implement dam maintenance

Unit of competency
National Code
NWPSOU023
State Code
AVY48
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/04/2016
Nominal Hours
30
Description
This unit describes the skills required to implement dam maintenance programs, including maintenance of dam safety mechanisms. The ability to interpret technical documentation, investigate and resolve maintenance problems and to collect and analyse technical information is essential to performance.This unit applies to those working as field and operational staff with a specific responsibility for the maintenance of ungated dams.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to manufacturer's specifications.Those undertaking this unit would work under supervision while performing routine tasks in a limited range of familiar contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for dam maintenance
  • 1.1 Plan and prepare for dam maintenance according to management plans and relevant documentation.
  • 1.2 Undertake inspection procedures.
  • 1.3 Develop a maintenance plan.
2. Implement dam maintenance plans
  • 2.1 Schedule dam maintenance works.
  • 2.2 Maintain and repair civil and mechanical dam assets.
  • 2.3 Operate and test equipment including winches, valves and gates.
3. Compile maintenance and inspection reports
  • 3.1 Collect required data from inspections, measurement instruments and delegated personnel.
  • 3.2 Collate, process, evaluate, validate, record and store data.
  • 3.3 Record and report structural, material and/or equipment problems.
  • 3.4 Recommend remedial action.
No information
No information
Replaces
State Code National Code Title Type
D1902 NWP320B Monitor and implement dam maintenance Unit of competency
Replaced By
State Code National Code Title Type
OBO32 NWPCAD009 Monitor and implement dam maintenance Unit of competency