Unit of competency Outline

Date retreived
23/07/2026 2:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and use bearings, seals, gaskets, sealants and adhesives

Select and use bearings, seals, gaskets, sealants and adhesives

Unit of competency
National Code
AURTTA005
State Code
AXB10
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry. It involves preparing for the task, selecting and using sealants and adhesives, preparing and installing bearings, seals and gaskets, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry, It includes agricultural machinery, heavy commercial vehicles, light vehicle, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to select and use bearings, seals, gaskets, sealants and adhesives
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Procedures, information and specifications are sourced and identified
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Select and use sealants and adhesives
  • 2.1 Sealants and adhesives appropriate for the job requirement are selected
  • 2.2 Sealants and adhesives are used according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.3 Sealants and adhesives are stored according to manufacturer specifications and workplace procedures
3. Prepare and install bearings, seals and gaskets
  • 3.1 Procedures and information for preparing, inspecting and installing bearings, seals and gaskets are identified and sourced
  • 3.2 Bearings, seals and gaskets are installed, and bearings adjusted as required, according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF373 AURTTA2005 Select and use bearings, seals, gaskets, sealants and adhesives Unit of competency
Replaced By
State Code National Code Title Type
OCJ42 AURTTA105 Select and use bearings, seals, gaskets, sealants and adhesives Unit of competency