Unit of competency Outline

Date retreived
23/07/2026 4:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate ramp equipment

Operate ramp equipment

Unit of competency
National Code
AVIW3004
State Code
AWP11
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/08/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to operate ramp equipment, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes conducting pre-operational checks, operating ramp equipment as part of baggage loading/unloading operations, and retracting and storing ramp equipment. This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to equipment and system operations of flight or ground operations personnel, and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision as a single operator or within a team environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.
Notes
Elements and Performance Criteria
1 Conduct pre-operational checks
  • 1.1 Personal protective equipment is selected and used in accordance with workplace procedures
  • 1.2 Pre-operational checks of ramp equipment are conducted in accordance with workplace procedures and manufacturer instructions
  • 1.3 Fluid levels are topped up as required in accordance with workplace procedures
  • 1.4 Ramp equipment faults and malfunctions identified during pre-operational checks are rectified or reported in accordance with workplace procedures and regulatory requirements
2 Operate ramp equipment as part of baggage loading/unloading operations
  • 2.1 Ramp equipment is manoeuvred to aircraft and positioned in preparation for baggage loading/unloading operations in accordance with workplace procedures, local instructions and relevant regulatory requirements
  • 2.2 Height of ramp equipment is adjusted to align with baggage hold doorway and baggage carts in accordance with workplace procedures and manufacturer instructions
  • 2.3 Ramp equipment is operated in accordance with workplace procedures, work health and safety (WHS)/occupational health and safety (OHS) regulations and manufacturer instructions
  • 2.4 Hazards associated with operation of ramp equipment are identified and appropriate precautions are taken in accordance with WHS/OHS regulations and workplace hazard management strategies
  • 2.5 Safe manual handling techniques are applied when handling baggage as part of ramp operation activities in accordance with WHS/OHS regulations and workplace procedures
  • 2.6 Loading/unloading of baggage is completed in collaboration with other members of ramp team in accordance with team leader/supervisor directions, load plan, workplace procedures and regulatory requirements
3 Retract and store ramp equipment
  • 3.1 Ramp equipment is retracted and manoeuvred to storage bay/area at completion of loading activities in accordance with workplace procedures
  • 3.2 Post-operational checks of ramp equipment are conducted in accordance with workplace procedures and manufacturer instructions
  • 3.3 Ramp equipment faults and malfunctions identified during post-operational checks are rectified or reported in accordance with workplace procedures and regulatory requirements
  • 3.4 Ramp equipment is refuelled and fluid levels are topped up in accordance with workplace procedures, relevant regulatory requirements and manufacturer instructions
  • 3.5 Equipment log or operational documentation is completed in accordance with workplace procedures, local instructions and regulatory requirements
No information
No information
Replaces
State Code National Code Title Type
WB822 AVIW3004B Operate ramp equipment Unit of competency
Replaced By
State Code National Code Title Type
OBC28 AVIW0018 Operate ramp equipment Unit of competency
State Code National Code Title Type
AZS3 AVI30416 Certificate III in Aviation (Ground Operations and Service) Qualification