Unit of competency Outline
Date retreived
22/07/2026 8:56 PM AWST
22/07/2026 8:56 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Implement and monitor materiel sustainment plans
Implement and monitor materiel sustainment plans
Unit of competency
National Code
TLIX4016A
TLIX4016A
State Code
D5391
D5391
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/11/2014
Field of Education
080317 - Quality Management
Original Release Date
04/11/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to implement and monitor materiel sustainment plans and associated subordinate plans. There are no specific licensing or certification requirements applicable to this unit.
Notes
Elements and Performance Criteria
1Identify requirements for the provision of materiel sustainment plans
- 1.1 Sources of information relevant to materiel sustainment plans are identified and obtained in accordance with organisational policy and procedures
- 1.2 Currency of information is reviewed and documented in accordance with organisational policy and procedures
- 1.3 Materiel sustainment plans are assessed against reviewed information
2Implement materiel sustainment plans
- 2.1 Performance indicators and other criteria for measurement of achievement are developed
- 2.2 Materiel sustainment risks and impacts relevant to the plan are identified, reported and managed
- 2.3 Materiel sustainment plans are implemented in accordance with organisational policy and procedures
- 2.4 Participation and contribution to materiel sustainment activities is established and maintained in accordance with the schedule
3Monitor and report on implementation of materiel sustainment plans
- 3.1 Materiel sustainment plans are monitored and regularly reviewed in accordance with organisational policy and procedures
- 3.2 Plans are amended and documented in accordance with organisational policy and procedures
- 3.3 Performance measures are monitored to ensure they address all key aspects of organisational performance and meet the requirements of stakeholders
- 3.4 Performance data is analysed on a regular basis both in terms of the indicators and compliance with organisational policy and procedures
- 3.5 Strategic performance is reported to all stakeholders in a transparent manner and meeting all compliance requirements
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Sources of information may include:
contractors
customers
legislation
managers
peers
plans
policies
publications
reference material
standards
supervisors
suppliers
Materiel sustainment plans may include:
disposal
facilities
finance
obsolescence
technical data
training
transitional plans
Organisational policy and procedures may include:
Australian Standards
international standards
organisational instructions and standards
Performance indicators may include:
costs
milestones
production
resources
scheduling
timing
Materiel sustainment may include:
the management and provision of products and services needed to meet the preparedness and performance requirements of a materiel system from the time of acceptance into operational service until disposal at minimised life cycle cost. Material sustainment may also be referred to as asset management and includes components of: sustainment management, engineering support, maintenance support, supply support and planning for disposal and/or carrying out end of life tasks
Compliance requirements may include:
authority
delegations
environmental
legislative
organisational policy
regulatory
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Sources of information may include:
contractors
customers
legislation
managers
peers
plans
policies
publications
reference material
standards
supervisors
suppliers
Materiel sustainment plans may include:
disposal
facilities
finance
obsolescence
technical data
training
transitional plans
Organisational policy and procedures may include:
Australian Standards
international standards
organisational instructions and standards
Performance indicators may include:
costs
milestones
production
resources
scheduling
timing
Materiel sustainment may include:
the management and provision of products and services needed to meet the preparedness and performance requirements of a materiel system from the time of acceptance into operational service until disposal at minimised life cycle cost. Material sustainment may also be referred to as asset management and includes components of: sustainment management, engineering support, maintenance support, supply support and planning for disposal and/or carrying out end of life tasks
Compliance requirements may include:
authority
delegations
environmental
legislative
organisational policy
regulatory
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessment must confirm the ability to:
apply relevant implementation processes
monitor and report on implementation processes
analyse data and information
apply knowledge of materiel sustainment plans to assist in work and to guide problem solving
Competency should be demonstrated over time and should be observed in a range of actual or simulated work contexts
Context of and specific resources for assessment
Competency should be assessed in the workplace or in a simulated workplace environment
Access is required to:
computer and relevant software
legislation, guidelines, procedures and protocols relating to materiel sustainment
plans
workplace documentation
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
Where possible, assessment should be supported by questions to assess required knowledge. Questioning techniques should suit the language and literacy levels of the candidate
Assessment methods should reflect workplace demands such as literacy and the needs of particular groups
Assessment methods suitable for valid and reliable assessment of this unit of competency may include a combination of methods such as:
authenticated evidence from the workplace and/or training programs
case studies
demonstration
feedback from supervisors and peers regarding the candidate's ability
observation
portfolios
projects
questioning
reviews or reports prepared by the candidate
scenarios
simulation or role plays
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessment must confirm the ability to:
apply relevant implementation processes
monitor and report on implementation processes
analyse data and information
apply knowledge of materiel sustainment plans to assist in work and to guide problem solving
Competency should be demonstrated over time and should be observed in a range of actual or simulated work contexts
Context of and specific resources for assessment
Competency should be assessed in the workplace or in a simulated workplace environment
Access is required to:
computer and relevant software
legislation, guidelines, procedures and protocols relating to materiel sustainment
plans
workplace documentation
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
Where possible, assessment should be supported by questions to assess required knowledge. Questioning techniques should suit the language and literacy levels of the candidate
Assessment methods should reflect workplace demands such as literacy and the needs of particular groups
Assessment methods suitable for valid and reliable assessment of this unit of competency may include a combination of methods such as:
authenticated evidence from the workplace and/or training programs
case studies
demonstration
feedback from supervisors and peers regarding the candidate's ability
observation
portfolios
projects
questioning
reviews or reports prepared by the candidate
scenarios
simulation or role plays
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVH19 | TLIX4016 | Implement and monitor materiel sustainment plans | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W935 | TLI41510 | Certificate IV in Materiel Logistics | Qualification |