Unit of competency Outline

Date retreived
23/07/2026 1:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install a terrestrial antenna

Install a terrestrial antenna

Unit of competency
National Code
ICTRFN202
State Code
AWD99
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
40
Description
This unit describes the skills and knowledge required to assemble, connect and test receiving antenna equipment according to plans, specifications and site specific requirements.It applies to individuals who might work on single and multiple dwellings, commercial buildings and other telecommunications structures that may be new or existing, stand alone or be a part of a site with multiple antennas.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the ICT Implementation Guide Companion Volume or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Prepare for work on terrestrial antenna
  • 1.1 Prepare for installation, applying all relevant legislation, codes, regulations and standards, and identify any safety issues
  • 1.2 Organise resources to be available on site
  • 1.3 Contact client to arrange access to site and notify about possible outage
  • 1.4 Organise tools and equipment, and ensure they are in safe working order and adjusted to manufacturer's specifications
2. Assemble and mount antenna and coaxial cable
  • 2.1 Assemble antenna on site according to plans, specifications and enterprise guidelines using safe industry practice
  • 2.2 Connect coaxial cable to antenna and install lightning protection devices
  • 2.3 Mount antenna to structure, and set polarisation and initial antenna azimuth and elevation
3. Test and align antenna system
  • 3.1 Connect installed antenna system to appropriate test equipment and pan antenna to optimise signal across all specified channel frequencies
  • 3.2 Conduct performance tests according to manufacturer's specifications and enterprise guidelines
  • 3.3 Interpret test results, compare with manufacturer's design specifications and make adjustments
4. Complete administrative duties
  • 4.1 Record test results and complete appropriate records
  • 4.2 Secure and clean up site to original condition in environmentally safe manner
  • 4.3 Notify client of work completion and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
WI904 ICTRFN2164B Install a terrestrial antenna Unit of competency