Unit of competency Outline

Date retreived
23/07/2026 6:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and produce hand-made box

Set up and produce hand-made box

Unit of competency
National Code
ICPCBF369
State Code
AUN63
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to set up and produce a hand-made box. It applies to the binding and finishing sector, not the carton sector of the industry. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine dimensions and style of box
  • 1.1 Options for style and cost are discussed with client
  • 1.2 Dimensions of article to be contained are determined through measurement and/or job specifications
  • 1.3 Final job specifications are determined and confirmed with client
2. Select materials
  • 2.1 Board weight, covering and lining materials are selected according to job specifications
  • 2.2 Grain direction is determined if relevant
3. Cut board, cover material and lining to size
  • 3.1 Board, cover material and lining are cut to correct size
  • 3.2 Board is scored to appropriate depth if necessary
  • 3.3 Waste is removed if applicable
  • 3.4 Lids are fitted, if necessary, to allow for the thickness of covering material
4. Assemble box
  • 4.1 Box is assembled according to job specifications
5. Attach covering material and lining
  • 5.1 Corners are cut correctly according to job specifications
  • 5.2 Covering material and lining are fixed with adequate and smooth adhesion
  • 5.3 Material is rubbed smoothly into corners of box
6. Press box if necessary
  • 6.1 Block for pressing is made up as required
  • 6.2 Even pressure is applied to box sections
7. Decorate or furnish box if required
  • 7.1 Appropriate decorating techniques are used where relevant
  • 7.2 Appropriate furnishings (clasps, hinges) are attached if required
No information
No information
Replaces
State Code National Code Title Type
D3063 ICPCF369C Set up and produce hand-made box Unit of competency
Replaced By
State Code National Code Title Type
OBP61 ICPCBF3690 Set up and produce hand-made box Unit of competency