Unit of competency Outline

Date retreived
22/07/2026 11:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain wheels and tyres

Maintain wheels and tyres

Unit of competency
National Code
MEM27029
State Code
OAT09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030701 - Mechanical Engineering
Original Release Date
24/01/2020
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to assess wheel condition, and repair/replace and maintain the wheel.It covers the basic maintenance and repair or replacement of wheel rims and to the full range of wheel/tyre assemblies, plant and equipment using appropriate regulations, codes of practice, manufacturer specifications or in-house standards as a guide for assessment repair and assembly.Where complex rim repairs are required appropriate fitting or welding units should also be selected. Where interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected. Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, job sheets or work instructions
2 Assess wheel condition
  • 2.1 Apply rim/tyre designs, constructions, codes, balancing, fastening principles and terminology when assessing wheel condition
  • 2.2 Assess fastening components for damage and security
  • 2.3 Recognise abnormal tyre wear and determine cause of fault
  • 2.4 Recognise unsafe tyre and/or wheel condition and determine remedial action
3 Rectify and maintain wheel
  • 3.1 Adhere to safety procedures associated with tyre/wheel removal, handling, inflation, assembly and disassembly and fastening
  • 3.2 Remove wheels/tyres and replace using appropriate tools, equipment and techniques
  • 3.3 Apply tools and equipment in accordance with SOPs
  • 3.4 Perform ballasting and/or inflation of tyres to specification
  • 3.5 Perform static/dynamic balancing of wheels to specification
  • 3.6 Rectify rim/tyre/tube faults to specifications, regulations or codes
  • 3.7 Lubricate wheel bearings to specification
  • 3.8 Record all service/rectification activities
No information
No information
Replaces
State Code National Code Title Type
W5582 MEM18038B Maintain wheels and tyres Unit of competency