Unit of competency Outline

Date retreived
22/07/2026 4:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate at non-towered aerodromes

Operate at non-towered aerodromes

Unit of competency
National Code
AVIY0036
State Code
OBC00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/08/2019
View on TGA
State Implementation and Classification
Approved Date
17/12/2019
Field of Education
031505 - Aircraft Operation
Original Release Date
17/12/2019
Nominal Hours
35
Description
This unit involves the skills and knowledge required to operate at non-towered aerodromes in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes conducting pre-flight preparations; taxiing aircraft; and applying aircraft departure, arrival and landing procedures.This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties that complement flight crew non-technical skills and contributes to safe and effective performance in complex aviation operational environments.Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Conduct pre-flight preparations
  • 1.1 Relevant non-towered aerodrome operational information is extracted from authorised sources
  • 1.2 Information is interpreted to determine appropriate departure, arrival and landing requirements
  • 1.3 Special aerodrome procedures are identified as required
  • 1.4 Weather forecasts and local observations are checked for operating validity for flight planned duration
  • 1.5 Relevant radio and navigation aid frequencies are identified for use during all flight modes
2 Taxi aircraft at a non-towered aerodrome or landing area
  • 2.1 Non-towered aerodrome or landing area charts are used
  • 2.2 Local or area barometric pressure adjusted for sea level (QNH) is set
  • 2.3 Operating intentions are broadcast via radio telecommunications on appropriate frequency
  • 2.4 Local and area traffic information is obtained and interpreted
  • 2.5 Aircraft separation and lookout is maintained for other aircraft and for other aerodrome obstructions or hazards
  • 2.6 Appropriate aircraft lighting is selected during aircraft taxi
  • 2.7 Aerodrome ground markings are identified and appropriate action taken during aircraft taxi
  • 2.8 Aircraft is taxied or air transited to runway holding point
3 Perform aircraft departure
  • 3.1 Runway approaches are checked and cleared in all directions prior to entering runway
  • 3.2 Aircraft transponder code and appropriate mode are selected
  • 3.3 Aircraft position and operating intentions are broadcast on appropriate frequencies
  • 3.4 Aircraft separation is maintained during aircraft departure sequence
  • 3.5 Air service provider is advised of departure details as required
4 Perform arrival and landing
  • 4.1 Relevant non-towered aerodrome operational information is extracted from authorised sources prior to entering circuit area
  • 4.2 Local or area barometric pressure adjusted for sea level (QNH) is set
  • 4.3 Aircraft position and operating intentions are broadcast on appropriate frequencies
  • 4.4 Aircraft separation and tracking tolerances are maintained
  • 4.5 Wind velocity and direction is assessed to determine appropriate circuit and landing direction
  • 4.6 Non-towered aerodrome runway or landing areas are confirmed as serviceable for landing sequence
  • 4.7 Runway areas and landing areas are checked and confirmed to be clear of landing obstacles and hazards
  • 4.8 Aircraft arrival sequence is conducted in accordance with manufacturer and organisational operating procedures
  • 4.9 Aircraft is landed and cleared from runway and landing areas
  • 4.10 Air service provider is advised of landing details as required
No information
No information
Replaces
State Code National Code Title Type
AVX73 AVIY0004 Operate at non-towered aerodromes Unit of competency