Unit of competency Outline

Date retreived
23/07/2026 2:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate mixing equipment

Operate mixing equipment

Unit of competency
National Code
PMBPROD255
State Code
BAJ09
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
26
Description
This unit of competency covers the skills and knowledge required to operate mixing equipment and ancillary equipment that is integral to the process to mix materials to meet a specification or recipe. It applies to mixing of any resin, multi-part mix or blend as typically used in the plastics, rubber and cablemaking sectors. This unit of competency applies to operators who are required to perform pre-operational and start up checks, monitor and adjust the equipment, maintain feed and recognise routine and non-routine problems and take appropriate action.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check work requirements
  • 1.1 Identify work requirements from production plan or request
  • 1.2 Check product, materials and equipment meet requirements for job
  • 1.3 Recognise requirements which may not be in accordance with usual practice
  • 1.4 Ask questions of appropriate person to confirm unusual practice
  • 1.5 Identify hazards associated with the job and take appropriate action
  • 1.6 Perform other pre-operational checks in accordance with procedures
2 Start up equipment to procedures
  • 2.1 Conduct pre-start checks
  • 2.2 Start up mixing equipment
3 Operate mixing equipment to procedures
  • 3.1 Check process is operating within required limits
  • 3.2 Check materials are in specification and to required quality standard
  • 3.3 Maintain supply of materials as required
  • 3.4 Complete logs and records as required
  • 3.5 Collect and segregate scrap, trim and other materials as required
  • 3.6 Keep equipment and work area clean
  • 3.7 Pause machine cycle and perform emergency stop, as required
4 Respond to routine problems in accordance with procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine process and quality problems and take appropriate action
No information
No information
Replaces
State Code National Code Title Type
W7586 PMBPROD255C Operate mixing equipment Unit of competency
Replaced By
State Code National Code Title Type
ODB42 PMBPROD255E Operate polymer mixing equipment Unit of competency