Unit of competency Outline

Date retreived
22/07/2026 9:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assess ground conditions

Assess ground conditions

Unit of competency
National Code
RIIMEX302D
State Code
WH382
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
29/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to assess ground conditions in the Resources and Infrastructure Industries.This unit is appropriate for those working in operational roles.No licensing or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for assessment of ground conditions
  • 1.1 Access, interpret and apply ground condition documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Determine and confirm ground areas to be inspected and assessed
  • 1.6 Obtain and interpret existing information on ground condition of each area to provide an initial assessment
  • 1.7 Communicate and coordinate activities with others prior to, during and on completion of the work activity
  • 1.8 Obtain and interpret emergency procedures, and be prepared for an emergency
  • 1.9 Access area to be assessed and ensure there is adequate lighting to perform the assessment
  • 1.10 Ensure that adequate ventilation is flowing into the work area
2. Inspect and assess ground conditions
  • 2.1 Conduct visual inspection of work area, and identify adverse conditions which could affect ground stability and safety
  • 2.2 Conduct assessment and identify and record areas which are stable and unstable
  • 2.3 Select and use tools, equipment and techniques to confirm ground stability of stable area, and remove loose material before commencing or continuing to next area
  • 2.4 Install barricades and warning signs where area cannot be made safe or ground is assessed as unstable
  • 2.5 Continuously assess ground conditions during work activities
3. Record and report ground conditions
  • 3.1 Record ground condition assessment results and recommended corrective actions
  • 3.2 Report ground conditions and recommended corrective actions to relevant personnel
No information
No information
Replaces
State Code National Code Title Type
D9338 RIIMEX302B Assess ground conditions Unit of competency