Unit of competency Outline

Date retreived
22/07/2026 9:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Program computer controlled equipment

Program computer controlled equipment

Unit of competency
National Code
PMBPROD385
State Code
BAI21
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to program computer controlled equipment for simple machine operations.This unit of competency applies to experienced operators who are required to identify computer controlled machine program elements; write, trial and edit the program and solve problems within area of responsibility. The operator will have an understanding of the operation of all relevant equipment and processes but is not required to demonstrate 'hands on' operation of equipment as part of this competency.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Write program
  • 1.1 Select appropriate program elements for machine controller
  • 1.2 Interpret engineering drawings/product specification and define basic machine function and tool path geometry
  • 1.3 Calculate coordinates for simple tool path or basic machining functions
  • 1.4 Write program in standard code format in accordance with standard operating procedures (SOPs)
2 Check program
  • 2.1 Produce operation sheets to specification in accordance with SOPs
  • 2.2 Operate machine in manual mode to test and prove program as required
  • 2.3 Edit program if necessary to adjust operation as required
  • 2.4 Check components for conformance to specification as required
3 Anticipate and solve problems
  • 3.1 Recognise a problem or a potential problem
  • 3.2 Determine problems needing priority action
  • 3.3 Seek information and assistance as required to solve problems
  • 3.4 Solve problems within area of responsibility
  • 3.5 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7673 PMBPROD385A Program computer controlled equipment Unit of competency
Replaced By
State Code National Code Title Type
ODB01 PMBPROD385E Program computer-controlled equipment Unit of competency
State Code National Code Title Type
BCT3 PMB30116 Certificate III in Polymer Processing Qualification
BCU0 PMB40116 Certificate IV in Polymer Technology Qualification