Unit of competency Outline

Date retreived
23/07/2026 3:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Analyse plant and equipment condition monitoring results

Analyse plant and equipment condition monitoring results

Unit of competency
National Code
MEM18016
State Code
OAU78
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to analyse condition monitoring results and develop recommendations based on the analysis. The data analysed is generated by a continuous plant and equipment condition monitoring program.Where production of formal reports is required unit MEM16010 Write reports should also be selected.Where production of reports of a technical nature is required unit MEM16014 Report technical information should also be selected.Where equipment condition monitoring and recording only is required to be performed then unit MEM18010 Perform equipment condition monitoring and recording should be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Analyse condition monitoring results
  • 2.1 Examine and analyse records/graphs/results of condition monitoring and identify problem areas
  • 2.2 Undertake necessary calculations/computations to determine indications of malfunction or impending failure
  • 2.3 Undertake appropriate reports/determinations of analyses to prescribed site SOPs
3 Develop recommendations
  • 3.1 Develop recommendations based on previous history, results, specifications and any relevant legislative requirements
  • 3.2 Report recommendations to appropriate authority
No information
No information
Replaces
State Code National Code Title Type
W5559 MEM18016B Analyse plant and equipment condition monitoring results Unit of competency
State Code National Code Title Type
BEJ8 MEM40119 Certificate IV in Engineering Qualification
BEK0 MEM50119 Diploma of Engineering - Advanced Trade Qualification