Unit of competency Outline
Date retreived
22/07/2026 1:48 AM AWST
22/07/2026 1:48 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply photoimaging lighting techniques
Apply photoimaging lighting techniques
Unit of competency
National Code
CUVPHI04B
CUVPHI04B
State Code
D1724
D1724
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
18/09/2008
Field of Education
100303 - Photography
Original Release Date
18/09/2008
Nominal Hours
20
Description
This unit describes the skills and knowledge required to employ lighting techniques to a range of subjects in different work spaces and to select equipment for different lighting techniques. In this activity occupational health and safety issues must be addressed. It is a specialisation unit and refers to specific photoimaging techniques. This work is carried out with limited supervision.Current photoimaging industry practice relies increasingly on digital imaging processes and this should be reflected in training and assessment of this unit. Analogue equipment and processes may be used to support this as appropriate to the specific context.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
Notes
Elements and Performance Criteria
1 Plan lighting requirements.
- 1.1 Correctly identify required lighting characteristics for the subject and purpose of the image.1.2 Select appropriate lighting equipment for the purpose.
2 Prepare specific work environment.
- 2.1 Select work environment which meets requirements for the production of work.2.2 Care for work environment so that it remains clean and safe during production processes.2.3 Select relevant camera system and accessories for the work.2.4 Correctly set up camera system and accessories for the work, including props and/or position models when required.2.5 Correctly assemble the lighting system in accordance with work requirements.2.6 Consider and implement the required safety aspects of the lighting set up and cabling.2.7 Use equipment and materials in a manner which minimises waste.
3 Light the subject.
- 3.1 Test lighting techniques to suit purpose of work.3.2 Confirm that lighting techniques are consistent with purpose of the work.3.3 Adjust, modify and calibrate qualities of light to suit subject.3.4 Calculate and determine the exposure for the subject consistent with purpose for the photograph(s).
4 Capture image.
- 4.1 Expose film or media using determined calculations.4.2 Review image captured against work requirements and take action accordingly.4.3 Accurately document the work progress as required.
5 Restore work environment and equipment.
- 5.1 Safely clean work environment after use.5.2 Clean and maintain equipment in accordance with manufacturer's instructions after use.5.3 Safely transport and store equipment and materials and ensure readiness for future use.
photo-documentary
portraiture (formal or candid)
scientific/medical/technical
still life, e.g. glassware
the built environment
the natural environment.
chairs, stools, posing equipment and tables
dust free environment
electricity
lighting, natural/available or studio
other portable equipment and materials, e.g. ground sheets, backgrounds
portable generator
ventilation/air conditioning
work tables and storage areas and facilities.
Federal, State and Territory legislation, regulations and standards.
120 camera, 4x5 camera
35mm SLR camera
cable release
digital cameras and backs
exposure meters
film and media
filters
range of lenses
tripods and/or camera stands.
equipment:
fibre optics
floor pack electronic flash systems
French flags and gobos
light modifying devices, including scrims, umbrellas, honeycombs and grids, soft boxes, reflectors, light absorbers
portable (monobloc type) systems
portable electronic flash
portable photoflood and tungsten light systems
exposure:
grey card readings
incident/reflective readings
lighting ratio and brightness range readings
off the film plane metering (TTL & OTF metering)
spot meter readings
light sensitive materials:
different types of film and electronic sensors
response of light sensitive material to different colours of light source
light sources:
candle flame and other ambient low light sources
fluorescent lighting
incandescent, tungsten, photoflood
metallogenic and discharge lamps
ultraviolet and infra-red
special situations:
scientific/technical techniques
techniques:
background effects
colour balancing and the use of colour temperature meters and filters
combined lighting and the illusion of movement
feathering the light
lighting for silverware
lighting for textured surfaces
lighting glassware, gloss ware
lighting techniques for translucent surfaces
painting with light
shadowless lighting
synchro sun and fill flash
white balance and custom colour optimisation for electronic sensors.
Apart from lighting and camera equipment other
gaffer tape
ground sheets
power cables and multi-outlet power boards for electrical equipment
suitable props
transport cases and bags for equipment.
aperture
lens focal length
lens hoods
shutter speed.
portraiture (formal or candid)
scientific/medical/technical
still life, e.g. glassware
the built environment
the natural environment.
chairs, stools, posing equipment and tables
dust free environment
electricity
lighting, natural/available or studio
other portable equipment and materials, e.g. ground sheets, backgrounds
portable generator
ventilation/air conditioning
work tables and storage areas and facilities.
Federal, State and Territory legislation, regulations and standards.
120 camera, 4x5 camera
35mm SLR camera
cable release
digital cameras and backs
exposure meters
film and media
filters
range of lenses
tripods and/or camera stands.
equipment:
fibre optics
floor pack electronic flash systems
French flags and gobos
light modifying devices, including scrims, umbrellas, honeycombs and grids, soft boxes, reflectors, light absorbers
portable (monobloc type) systems
portable electronic flash
portable photoflood and tungsten light systems
exposure:
grey card readings
incident/reflective readings
lighting ratio and brightness range readings
off the film plane metering (TTL & OTF metering)
spot meter readings
light sensitive materials:
different types of film and electronic sensors
response of light sensitive material to different colours of light source
light sources:
candle flame and other ambient low light sources
fluorescent lighting
incandescent, tungsten, photoflood
metallogenic and discharge lamps
ultraviolet and infra-red
special situations:
scientific/technical techniques
techniques:
background effects
colour balancing and the use of colour temperature meters and filters
combined lighting and the illusion of movement
feathering the light
lighting for silverware
lighting for textured surfaces
lighting glassware, gloss ware
lighting techniques for translucent surfaces
painting with light
shadowless lighting
synchro sun and fill flash
white balance and custom colour optimisation for electronic sensors.
Apart from lighting and camera equipment other
gaffer tape
ground sheets
power cables and multi-outlet power boards for electrical equipment
suitable props
transport cases and bags for equipment.
aperture
lens focal length
lens hoods
shutter speed.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The following evidence is critical to the judgement of competence in this unit:
the selection of appropriate camera and lighting equipment and associated accessories for specified subjects
application of a range of lighting techniques for the specified subjects.
Context of and specific resources for assessment
The assessment context must provide for:
project or work activities that allow the candidate to select and apply a range of lighting techniques for specified subjects
presence of time constraints that reflect industry practice and standards.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of the application of lighting techniques
evaluation of lighting within images produced by the candidate
questioning and discussion about the candidate's intentions and work outcome
verbal or written reports
review of folios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Guidance information for assessment
Assessment of this unit requires access to the materials, resources and equipment needed to select, set up, adjust and apply camera and lighting systems.
It is highly recommended that this unit be assessed in conjunction with the following units:
CUVDES05B Interpret and respond to a brief
CUVDES04B Integrate colour theory and design processes in response to a brief
CUVPHI06B Plan and carry out image capture in response to a brief
CUVPHI07B Process photoimages to work print/file stage
CUVPHI08B Enhance, manipulate and output photoimages
CUFSAF01B Follow health safety and security procedures.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The following evidence is critical to the judgement of competence in this unit:
the selection of appropriate camera and lighting equipment and associated accessories for specified subjects
application of a range of lighting techniques for the specified subjects.
Context of and specific resources for assessment
The assessment context must provide for:
project or work activities that allow the candidate to select and apply a range of lighting techniques for specified subjects
presence of time constraints that reflect industry practice and standards.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of the application of lighting techniques
evaluation of lighting within images produced by the candidate
questioning and discussion about the candidate's intentions and work outcome
verbal or written reports
review of folios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Guidance information for assessment
Assessment of this unit requires access to the materials, resources and equipment needed to select, set up, adjust and apply camera and lighting systems.
It is highly recommended that this unit be assessed in conjunction with the following units:
CUVDES05B Interpret and respond to a brief
CUVDES04B Integrate colour theory and design processes in response to a brief
CUVPHI06B Plan and carry out image capture in response to a brief
CUVPHI07B Process photoimages to work print/file stage
CUVPHI08B Enhance, manipulate and output photoimages
CUFSAF01B Follow health safety and security procedures.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C6526 | CUVPHI04A | Apply photoimaging lighting techniques | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7713 | CUVPHI403A | Apply photo imaging lighting techniques | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C621 | CUV40403 | Certificate IV in Photoimaging | Qualification |