Unit of competency Outline
Date retreived
22/07/2026 9:27 PM AWST
22/07/2026 9:27 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Undertake marine sheathing operations
Undertake marine sheathing operations
Unit of competency
National Code
MEM25006B
MEM25006B
State Code
W5719
W5719
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
18/06/2009
Field of Education
031703 - Marine Construction
Original Release Date
18/06/2009
Nominal Hours
18
Description
This unit covers applying sheathing to marine structures (sheathing operations). Basic composite sheathing operations are covered by Unit MEM25001B (Apply fibre-reinforced materials).
Notes
Elements and Performance Criteria
1. Identify job requirements
- 1.1. Job specifications are identified from written and verbal instructions as appropriate.
- 1.2. Surface materials are identified from specification or verbal instructions.
- 1.3. Application schedules are identified.
2. Observe safety practices
- 2.1. Application material is prepared in accordance with manufacturer specifications.
- 2.2. Work area is made safe in accordance with organisational and legislative requirements.
- 2.3. Safety practices are observed and appropriate protective clothing is worn.
3. Prepare surface areas and apply materials
- 3.1. Surface area is prepared to suit job application.
- 3.2. Surface contaminants are removed using appropriate method.
- 3.3. Where applicable, non-contact surface areas are protected.
- 3.4. Measures to prevent external contamination are applied in accordance with organisational procedures.
- 3.5. Appropriate equipment is used to calibrate mixing quantities.
- 3.6. Hand tools for mixing and application are selected to suit job requirements
4. Prepare application materials
- 4.1. Materials are prepared/mixed in accordance with manufacturer specification.
- 4.2. Material quantities are calculated and cut to produce minimum wastage.
5. Apply materials
- 5.1. Application tools are selected and used correctly.
- 5.2. Application procedures are carried out in accordance with manufacturer specification.
- 5.3. Where applicable, job materials are held securely in place until curing process is achieved.
- 5.4. Excess material is removed.
- 5.5. Application tools are cleaned up and stored.
- 5.6. Job area is cleaned up to maximise safe working conditions.
6. Seal fabricated components
- 6.1. Surface preparation is completed as per manufacturer specification.
- 6.2. Sealant is applied to components and secured as per specifications and/or drawings.
- 6.3. Excess sealant is cleaned off and tested/checked to ensure water tightness.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Surface materials
Copper, gal sheet and other metals, fabric, sheathing resins, a range of adhesives, sealants and fillers and where applicable may be applied to timber, fibre-reinforced plastics and metal surface areas
Hand tools for mixing and application
Mixing sticks, putty/broad knives, scales, tins of equal size, trowels, squeegee, brushes and rollers
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Surface materials
Copper, gal sheet and other metals, fabric, sheathing resins, a range of adhesives, sealants and fillers and where applicable may be applied to timber, fibre-reinforced plastics and metal surface areas
Hand tools for mixing and application
Mixing sticks, putty/broad knives, scales, tins of equal size, trowels, squeegee, brushes and rollers
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to undertake marine sheathing operations. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with marine sheathing operations or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to undertake marine sheathing operations. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with marine sheathing operations or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAT67 | MEM25006 | Undertake marine sheathing operations | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W231 | MEM10105 | Certificate I in Engineering | Qualification |
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W233 | MEM20105 | Certificate II in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W236 | MEM30105 | Certificate III in Engineering - Production Systems | Qualification |
| W234 | MEM20205 | Certificate II in Engineering - Production Technology | Qualification |
| W242 | MEM30705 | Certificate III in Marine Craft Construction | Qualification |