Unit of competency Outline

Date retreived
23/07/2026 9:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct airless and atomised spraying operations

Conduct airless and atomised spraying operations

Unit of competency
National Code
RIICRM206D
State Code
WH151
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/05/2014
Nominal Hours
16
Description
This unit describes a participant’s skills and knowledge required to conduct airless and atomised spraying operations in the Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct airless and atomised spraying operations
  • 1.1 Access, interpret and apply airless and atomised spraying operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Identify and implement traffic management signage requirements
  • 1.4 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.5 Identify, address and report hazards, risks and environmental issues
  • 1.6 Select and wear correct personal protective equipment appropriate for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Prepare surface and set out
  • 2.1 Clear area of dirt, debris and other contaminants
  • 2.2 Identify location for line marking and set out with control points
  • 2.3 Spot straight lines and curves in preparation for marking
  • 2.4 Remove pre-existing visible marks/lines
3. Prepare marking materials
  • 3.1 Mix and prepare marking material
  • 3.2 Adjust additives and consistency of material to allow easy application and appropriate drying time
  • 3.3 Transfer marking material carefully to applicator container
4. Apply road marking materials
  • 4.1 Apply airless and/or atomised spray equipment across the surface with the correct movement and pressure
  • 4.2 Apply road marking material to the surface providing an even coverage
  • 4.3 Identify and correct defects in the coating
  • 4.4 Maintain equipment
5. Measure work
  • 5.1 Assess, record and report work outcomes
  • 5.2 Measure, calculate and quantify amount of line marking completed
  • 5.3 Identify and report non-conforming work
6. Clean up
  • 6.1 Clear work area and dispose of or recycle materials
  • 6.2 Clean, check, maintain and store tools and equipment
  • 6.3 Carry out housekeeping activities
No information
No information
Replaces
State Code National Code Title Type
WB426 RIICRM206A Conduct airless and atomised spraying operations Unit of competency
Replaced By
State Code National Code Title Type
OCX38 RIICRM206E Conduct airless and atomised spraying operations Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification