Unit of competency Outline

Date retreived
22/07/2026 11:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut paper

Cut paper

Unit of competency
National Code
FWPWPP3215
State Code
AXJ26
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/10/2016
Nominal Hours
5
Description
This unit of competency describes the outcomes required to cut resin impregnated paper of different thicknesses in roll form to width and length in readiness for lamination processes.The unit applies to production operators and technicians who cut paper in a forest and wood products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cutting
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Identify type and quantity of paper to be cut.
  • 1.3 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.4 Select cutting process and plan in line with work order.
2. Cut paper
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre start-up equipment checks to ensure operational effectiveness.
  • 2.3 Coordinate conveyor and guillotine operation with paper production.
  • 2.4 Select optimal cutting positions to minimise defects and maximise full width sheets.
  • 2.5 Monitor feed rate and conveyors regularly for material flow problems and complete paper cutting.
  • 2.6 Assess paper visually throughout cutting process for strength and defects.
3. Redistribute material
  • 3.1 Direct paper to storage or processing operations in line with work order.
  • 3.2 Dispose of off cuts and defective material in line with environmental protection practices
  • 3.3 Clean work area in line with organisational safety procedures.
  • 3.4 Record and report production outcomes and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6130 FPIWPP3215B Cut paper Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification