Unit of competency Outline

Date retreived
22/07/2026 9:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Erect structures

Erect structures

Unit of competency
National Code
MEM10012
State Code
OET91
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
040301 - Building Science And Technology
Original Release Date
19/04/2023
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to inspect and prepare the erection site, erect structures and applies to structures that are exclusively/predominantly steel metal and are load-bearing of substantial size made out of steel and/or other metals.Specifications for the structure must be supplied via engineering drawings or the like and would include site location information. Where workshop assembly techniques are required, see unit MEM05089 Assemble fabricated components. Where design skills are required, see unit MEM09011 Apply basic engineering design concepts.Where lifting or rigging skills are required, see appropriate units. Where welds are required to meet legislative or regulating requirements then see appropriate welding units.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2. Inspect and prepare erection site
  • 2.1 Check site for correct location, dimensions and levels
  • 2.2 Report non-compliance with specifications to appropriate authority
  • 2.3 Undertake minor alterations, corrections or adjustments with approval of appropriate authority
  • 2.4 Prepare all surfaces and materials and/or components for use
  • 2.5 Identify and check structure components against specifications
3. Erect structures
  • 3.1 Carry out all work in a safe manner and in accordance with defined procedures
  • 3.2 Prepare structure components for correct sequential erection
  • 3.3 Erect components and fix according to specifications
  • 3.4 Adjust structures to specifications
  • 3.5 Ensure all reports and documentation is completed to required specifications
No information
No information
Replaces
State Code National Code Title Type
OAV82 MEM10001 Erect structures Unit of competency