Unit of competency Outline

Date retreived
22/07/2026 1:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate plugs

Fabricate plugs

Unit of competency
National Code
AUMGTS003
State Code
WH972
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030101 - Manufacturing Engineering
Original Release Date
11/03/2014
Nominal Hours
52
Description
This unit describes the performance outcomes required to fabricate a plug for fibreglass components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan for fabrication
  • 1.1 Work order and job specifications are identified and job requirements and plug material are confirmed
  • 1.2 Equipment for fabrication of plug is selected and checked for safe operation
  • 1.3 Plug shape is established and plug dimensions are determined from job specifications
2. Shape material for plug
  • 2.1 Workplace procedures are identified and followed during the shaping activities
  • 2.2 Plug templates and patterns are identified and produced from selected materials
  • 2.3 Plug material is cut and prepared according to job specifications
  • 2.4 Material surface is shaped using fabrication equipment
  • 2.5 Plug dimensions are checked against template and job specifications
3. Complete work processes
  • 3.1 Plug is finished according to workplace procedures and job requirements
  • 3.2 Work area and equipment are cleaned, inspected and maintained according to workplace procedures
  • 3.3 Waste material is collected and recycled or disposed of according to workplace procedures
  • 3.4 Faulty equipment is identified, tagged and reported
  • 3.5 Job sheets are completed and reported to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
WE172 AUMGTS3003 Fabricate plugs Unit of competency