Unit of competency Outline

Date retreived
23/07/2026 1:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Diagnose and repair electric bicycles

Diagnose and repair electric bicycles

Unit of competency
National Code
AURBTR104
State Code
OCK33
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
25
Description
This unit describes the skills and knowledge required to diagnose and repair faults in electric bicycles. This unit involves preparing for the work, selecting and using specialist tools and equipment, diagnosing the bicycle condition, interpreting manufacturer specifications, performing repairs and testing on electric bicycle components, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry. Electric power-assisted bicycles are throttle and pedal assist sensor (PAS) bicycles with 250 watts rated power at the wheel. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to diagnose and repair electric bicycle
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Source and interpret diagnostic information
  • 1.3 Analyse diagnostic options and source testing strategy, selecting those required by the circumstances
  • 1.4 Identify hazards and manage risks associated with the work
  • 1.5 Select and check diagnostic tools and equipment required by testing strategy for serviceability
2. Diagnose electric bicycle system
  • 2.1 Carry out diagnostic tests according to workplace procedures and safety requirements without causing damage to components or systems
  • 2.2 Identify faults from diagnostic test results and determine causes of faults
  • 2.3 Confirm and report diagnosis findings and develop recommendations for required repairs or adjustments according to workplace procedures
3. Repair electric bicycle system
  • 3.1 Source and interpret repair information
  • 3.2 Analyse and select repair options required by the circumstances
  • 3.3 Check and select repair tools, equipment and materials
  • 3.4 Carry out repairs and component replacements and adjustments according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 3.5 Carry out post-repair testing according to workplace procedures to confirm fault rectification, and rectify any further problems introduced during the repair process
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
No information