Unit of competency Outline

Date retreived
23/07/2026 6:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Implement Dam Safety Surveillance Procedures

Implement Dam Safety Surveillance Procedures

Unit of competency
National Code
UEPOPS345A
State Code
S5231
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
31/05/2011
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
31/05/2011
Nominal Hours
30
Description
1)
This unit deals with the skills and knowledge required for the scheduling, implementation and reporting of dam safety surveillance.
Notes
Elements and Performance Criteria
1 Plan and Prepare for dam surveillance
  • 1.1 Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers' specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedure.
  • 1.2 Resources required to satisfy the work plan are identified and obtained in accordance with enterprise procedures.
  • 1.3 Coordination requirements are resolved with others involved, affected or required by the work.
  • 1.4 International and national guidelines for dam surveillance together with appropriate regulatory requirements are interpreted and adopted.
  • 1.5 Monitoring frequency and sites for dam surveillance are determined in accordance with site requirements.
  • 1.6 Instrument requirements and data collection methods are identified in accordance with enterprise/site procedures.
2 Implement Dam Safety Surveillance
  • 2.1 Dam safety surveillance procedures are implemented in accordance with enterprise procedures.
  • 2.2 Data from instruments and personnel is collected and processed in accordance with enterprise procedures.
  • 2.3 Test and measurement instruments are used in accordance with manufacturers' instructions and site requirements.
  • 2.4 Abnormal conditions/defects are identified and reported to the appropriate personnel in accordance with enterprise/site requirements.
3 Complete Safety Surveillance Reports
  • 3.1 Calibration of instruments checked after each use in accordance with manufacturers' specification and site requirements.
  • 3.2 Dam surveillance reporting and documentation is undertaken in accordance with enterprise/statutory and site procedures.
No information
No information
Replaces
State Code National Code Title Type
AYF85 UTPNEG229A Implement dam safety surveillance procedures Unit of competency
Replaced By
State Code National Code Title Type
WE367 UEPOPS345B Implement dam safety surveillance procedures Unit of competency
State Code National Code Title Type
S501 UEP30106 Certificate III in ESI Generation (Systems Operations) Qualification