Unit of competency Outline

Date retreived
22/07/2026 9:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble electronic apparatus

Assemble electronic apparatus

Unit of competency
National Code
UEENEEA001B
State Code
W7721
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
29/10/2009
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
29/10/2009
Nominal Hours
36
Description
1)1.1) DescriptorThis unit covers fitting and inter connecting of electronic sub assemblies. It encompasses the safe use of hand tools, powered tools, identifying components, high reliability soldering, following set procedures and work instructions and keeping work records.
Notes
Elements and Performance Criteria
1 Prepare to assemble electronic components.
  • 1.1 OHS procedures for a given work area are identified, obtained and understood
  • 1.2 Established OHS risk control measures for work preparation are followed
  • 1.3 Work instructions are obtained and understood
  • 1.4 Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others
  • 1.5 Materials required for work are obtained in accordance with established routines and procedures
  • 1.6 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety
2 Assemble electronic components.
  • 2.1 Established OHS risk control work measures are followed
  • 2.2 Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures
  • 2.3 Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures
  • 2.4 Interconnections are made to comply with industry/ enterprise standards.
  • 2.5 Work is completed in acceptable timeframe given environment and workplace conditions
3 Check quality of assembled components.
  • 3.1 Established OHS risk control measures for work completion are followed
  • 3.2 Quality of assembled component is checked against enterprise/industry standards
  • 3.3 Prescribed solutions are used where corrective actions to assembled components are necessary
No information
No information
Replaced By
State Code National Code Title Type
WC374 UEENEEA101A Assemble electronic components Unit of competency