Unit of competency Outline

Date retreived
23/07/2026 1:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine material using CNC machining and processing centres

Machine material using CNC machining and processing centres

Unit of competency
National Code
FWPCOT3235
State Code
AXL28
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
3.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
32
Description
This unit of competency describes the skills and knowledge required to set up, operate and maintain computer numerical control (CNC) machining and processing centres used to process and cut holes in engineered wood products and timber components in a manufacturing facility. Work also involves operator maintenance.The unit applies to individuals who work as production workers, timber fabricators and engineered timber products technicians. Operators generally work under broad or limited direction to complete routine activities related to their own work, and take responsibility for their work.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for machining engineered wood products or timber
  • 1.1 Review work order, machining specifications, workplace health and safety requirements, environmental protection practices and emergency procedures for CNC machining operation and, where required, check with appropriate personnel
  • 1.2 Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices
  • 1.3 Obtain the type and quantity of material for machining from a storage location
2. Set up the CNC machine
  • 2.1 Set CNC program to meet work specifications
  • 2.2 Check the CNC machine mechanisms, cutting tools, jigs, emergency stops, gauges, guards and controls for safe and effective operation
  • 2.3 Adjust the CNC machine settings according to work specifications
  • 2.4 Complete trial run to check system and machine operation for accuracy, quality and dimensions of finished work
  • 2.5 Accept or reject trialled material and dispose of according to environmental protection practices
  • 2.6 Complete final adjustments to the CNC program, cutting tools and equipment
3. Operate the CNC machine
  • 3.1 Use the CNC machine, cutting tools and equipment according to organisational safety procedures, manufacturer instructions, operational capacity and purpose and environmental protection practices
  • 3.2 Feed engineered wood product or timber into the CNC machine, operate cutting tools according to tooling requirements and regularly monitor to minimise waste and ensure correct dimensions are produced
  • 3.3 Repair or dispose of incorrect cuts, off-cuts and material with defects according to environmental protection practices
  • 3.4 Identify routine processing problems and resolve or report to appropriate personnel
4. Complete operator maintenance
  • 4.1 Lock out the CNC machine according to workplace health and safety procedures
  • 4.2 Check cutting tools for bluntness or damage
  • 4.3 Remove and replace cutting tools according to manufacturer recommendations
  • 4.4 Dispose of used cutting tools according to environmental protection practices
  • 4.5 Keep machining area clear of dust and debris according to organisational safety procedures
  • 4.6 Record and report production outcomes, machine and equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
D5944 FPICOT3235B Machine material using CNC machining and processing centres Unit of competency
Replaced By
State Code National Code Title Type
OFD19 FWPCOT3332 Machine timber or engineered wood products using CNC machining and processing centres Unit of competency