Unit of competency Outline
Date retreived
22/07/2026 11:35 PM AWST
22/07/2026 11:35 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install and test a radio frequency identification system
Install and test a radio frequency identification system
Unit of competency
National Code
ICTTEN4202A
ICTTEN4202A
State Code
D3468
D3468
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
12/06/2014
Field of Education
031307 - Communications Technologies
Original Release Date
12/06/2014
Nominal Hours
45
Description
This unit describes the performance outcomes, skills and knowledge required to undertake a radio frequency identification (RFID) installation, configuration and testing. This could be part of the upgrade in an existing or the implementation of a new logistical or security network using RFID technology.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement but users should confirm requirements with the relevant federal, state or territory authority.
Notes
Elements and Performance Criteria
1. Prepare to install specified RFID system
- 1.1. Prepare for given work according to relevant legislation, occupational health and safety (OHS), codes, regulations and standards
- 1.2. Arrange access to the site according to required procedure
- 1.3. Choose the most suitable RFID system based on specifications and in consultation with appropriate person
- 1.4. Evaluate options for equipment installation siting and antenna positioning to include the effects of electromagnetic interference and shielding
- 1.5. Investigate causes of interference with RFID systems
- 1.6. Specify the network element requirements for the installation and any training requirements for clients
- 1.7. Create a deployment plan including down times and advise the user group
- 1.8. Obtain all components and devices required for the RFID system
2. Install specified RFID system and resolve any faults
- 2.1. Install interrogators or readers according to given plan
- 2.2. Install tags and document the correct procedures for locating and orienting tags
- 2.3. Install and undertake network configuration activities using relevant operating system and application upgrades to integrate RFID system into the overall network
- 2.4. Troubleshoot problems between interrogators or readers, tags and networks including tuning for optimum performance and rectify any faults
3. Test the RFID installation according to specification and standards
- 3.1. Test system installation according to design specifications and standards including optimum placement of tags and data transmission completeness and record outcomes
- 3.2. Carry out any changes
- 3.3. Validate changes or additions against specifications
- 3.4. Document the test results
4. Complete documentation in compliance with customer requirements and clean up worksite
- 4.1. Complete all documentation for users according to the design and customer requirements
- 4.2. Complete report and notify client of status of the network and standards applying to the installation
- 4.3. Clean up and restore worksite to client's satisfaction
- 4.4. Secure sign off from appropriate person
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
RFID system may include:
antenna
cabling
databases
interrogators or readers
power supplies
tags
wireless units.
Specifications may include:
cable drops
device mounting locations
electrical specifications for:
adapters
interrogators
power units
readers
sensors
tags
wireless units
interrogation zone locations
RFID network topology
site diagrams.
Appropriate person may include:
authorised business representative
client
IT support manager
network administrator
RFID network manager
small or medium enterprise (SME) customer
small office home office (SOHO) customer
supervisor.
Network element requirements may include:
drives
routers
servers
switches.
Training requirements relate to:
education requirements for support staff
client requirements
relevant enterprise policies.
Clients may include:
external organisations
individual people
internal departments
internal employees
logistic company
warehouse.
User group may include:
administration
dispatch
inventory
stores
transport
warehouse.
Configuration may include:
access control needs
hostnames
IP addresses
network connectivity issues
port numbers
server domains.
Optimum performance may include:
antenna type
cable length or loss
equipment mounting and protection
interference considerations
latency
tag type
active
operating frequency
passive.
Documentation may include:
audit trails
ISO, IEC, AS standards
naming standards
operational instructions
project management templates
report writing
training documentations
version control.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
RFID system may include:
antenna
cabling
databases
interrogators or readers
power supplies
tags
wireless units.
Specifications may include:
cable drops
device mounting locations
electrical specifications for:
adapters
interrogators
power units
readers
sensors
tags
wireless units
interrogation zone locations
RFID network topology
site diagrams.
Appropriate person may include:
authorised business representative
client
IT support manager
network administrator
RFID network manager
small or medium enterprise (SME) customer
small office home office (SOHO) customer
supervisor.
Network element requirements may include:
drives
routers
servers
switches.
Training requirements relate to:
education requirements for support staff
client requirements
relevant enterprise policies.
Clients may include:
external organisations
individual people
internal departments
internal employees
logistic company
warehouse.
User group may include:
administration
dispatch
inventory
stores
transport
warehouse.
Configuration may include:
access control needs
hostnames
IP addresses
network connectivity issues
port numbers
server domains.
Optimum performance may include:
antenna type
cable length or loss
equipment mounting and protection
interference considerations
latency
tag type
active
operating frequency
passive.
Documentation may include:
audit trails
ISO, IEC, AS standards
naming standards
operational instructions
project management templates
report writing
training documentations
version control.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
plan installation
use basic research skills for adapting RFID technologies to specified plan and design
implement and verify RFID operations
implement RFID architecture across a secure environment
encode RFID tags and attach to items
integrate RFID information into business applications
configure the network with IP addressing
cable and test the RFID network
create technical and user documentation.
Context of and specific resources for assessment
Assessment must ensure:
site where RFID installation may be conducted
use of field measurement equipment currently used in industry
relevant network element specifications
technical requirements for an RFID network
cabling
networked (LAN) computers
workstations
RFID diagnostic software
WAN service point of presence.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate installing and testing an RFID system
oral or written questioning of underpinning skills and knowledge
evaluation of report prepared by the candidate outlining testing procedures, test results and recommendation of network changes.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN4198A Install, configure and test an internet protocol network.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
plan installation
use basic research skills for adapting RFID technologies to specified plan and design
implement and verify RFID operations
implement RFID architecture across a secure environment
encode RFID tags and attach to items
integrate RFID information into business applications
configure the network with IP addressing
cable and test the RFID network
create technical and user documentation.
Context of and specific resources for assessment
Assessment must ensure:
site where RFID installation may be conducted
use of field measurement equipment currently used in industry
relevant network element specifications
technical requirements for an RFID network
cabling
networked (LAN) computers
workstations
RFID diagnostic software
WAN service point of presence.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct observation of the candidate installing and testing an RFID system
oral or written questioning of underpinning skills and knowledge
evaluation of report prepared by the candidate outlining testing procedures, test results and recommendation of network changes.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:
ICTTEN4198A Install, configure and test an internet protocol network.
Aboriginal people and other people from a non-English speaking background may have second language issues.
Access must be provided to appropriate learning and assessment support when required.
Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.
In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.
Where applicable, physical resources should include equipment modified for people with special needs.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWD33 | ICTTEN418 | Install and test a radio frequency identification system | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWG1 | ICT40415 | Certificate IV in Information Technology Networking | Qualification |
| D560 | ICA40411 | Certificate IV in Information Technology Networking | Qualification |