Unit of competency Outline

Date retreived
23/07/2026 1:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble complex blocked millinery components

Assemble complex blocked millinery components

Unit of competency
National Code
MSTML3005
State Code
BAV05
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
90
Description
This unit of competency covers the skills and knowledge required to assemble complex blocked millinery shapes and components that require the selection and application of advanced millinery assembly and construction techniques.The unit of competency applies to assembling combinations of complex blocked millinery shapes, such as hand-blocked crown and brim shapes, resulting in unique millinery with an intricate silhouette.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to assemble complex blocked millinery components
  • 2.1 Relate blocked primary and secondary components to design specification
  • 2.2 Collate blocked components and adjust according to design of unusual and contrasting blocked shapes
  • 2.3 Perform adjustments to each component by trimming or adding extensions
  • 2.4 Select construction components and millinery assembly techniques according to the design and handling characteristics of the millinery materials, components, trims and the requirements of the design
  • 2.5 Plan sequence of operations
3 Assemble and trim blocked components
  • 3.1 Pin components, tack or otherwise ready items to assemble
  • 3.2 Apply millinery hand sewing or machine construction techniques to assemble components
  • 3.3 Inspect assembled components to ensure desired proportion and conformance with design specification
  • 3.4 Apply functional and aesthetic trims to the millinery according to the design and specification
4 Finish millinery and maintain records
  • 4.1 Steam, brush or mould the final shape
  • 4.2 Attach labels and tags
  • 4.3 Select and apply techniques to finish the millinery for presentation or despatch
  • 4.4 Maintain finished millinery and conformance records and reports
  • 4.5 Photograph finished millinery for recording purposes
No information
No information
Replaces
State Code National Code Title Type
W7423 LMTML3006A Assemble complex blocked millinery components Unit of competency
State Code National Code Title Type
BDG5 MST30316 Certificate III in Millinery Qualification
BDF8 MST40416 Certificate IV in Millinery Qualification