Unit of competency Outline

Date retreived
23/07/2026 1:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle steering systems

Service bicycle steering systems

Unit of competency
National Code
AURBTD101
State Code
OCK46
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to service bicycle steering systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, servicing and testing the bicycle steering system, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle steering system
  • 1.1 Identify job requirements are determined from workplace instructions
  • 1.2 Inspect condition of steering system for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications
  • 1.3 Identify hazards associated with the work and manage risks
  • 1.4 Select and check materials, parts, tools and equipment, including personal protective equipment (PPE), for serviceability
  • 1.5 Prepare work area and plan service sequence, including post-service testing, to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of steering system
  • 2.1 Use tools and equipment according to workplace procedures and manufacturer specifications
  • 2.2 Service bicycle steering system according to job requirements, manufacturer specifications, and safety and environmental requirements
  • 2.3 Test operation of serviced steering system through its full range and make adjustments as required
  • 2.4 Report results and quality issues to authorised personnel as required
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE42 AURBTD001 Service bicycle steering systems Unit of competency