Unit of competency Outline

Date retreived
22/07/2026 5:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct stock size block for garment to meet size and fit specifications

Construct stock size block for garment to meet size and fit specifications

Unit of competency
National Code
MSTFD4008
State Code
BAW90
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
40
Description
The unit of competency covers the skills and knowledge required to construct blocks to meet size and fit specifications in garment production. Blocks are used as the basis for patternmaking to develop new styles. Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to construct block
  • 2.1 Interpret and clarify size and fit specifications and Australian Standards with designer or relevant personnel
  • 2.2 Identify base size to be constructed and check for compatibility with fit model
  • 2.3 Evaluate and record size and fit model specifications, body movement and comfort requirements
  • 2.4 Select appropriate drafting principles and methods for block construction
3 Construct initial block
  • 3.1 Analyse measurements of fit model and enter data into block drafting formulas and methodology
  • 3.2 Determine ease allowance
  • 3.3 Construct block using patternmaking technical skills and ensure compliance with safe work practices and industry requirements
  • 3.4 Document methods and formulas
  • 3.5 Cut and construct toiles to check accuracy
4 Complete final block
  • 4.1 Transfer information from toiles to blocks, including any minor adjustments
  • 4.2 Label final blocks and check all necessary information is accurate and complete and complies with specifications
  • 4.3 File and store blocks according to appropriate criteria and complete all required documentation
No information
No information
Replaces
State Code National Code Title Type
W7227 LMTFD4008B Construct stock size block for garment to meet size and fit specifications Unit of competency
Replaced By
State Code National Code Title Type
OEZ16 MSTAT4007 Construct stock size blocks for garments Unit of competency