Unit of competency Outline

Date retreived
21/07/2026 11:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Analyse data and report results

Analyse data and report results

Unit of competency
National Code
MSL925004
State Code
OAC01
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/07/2018
View on TGA
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
010103 - Statistics
Original Release Date
29/11/2018
Nominal Hours
120
Description
This unit of competency describes the skills and knowledge to perform scientific calculations, analyse trends and uncertainty in data and report results within the required timeframe.This unit of competency applies to technical officers and laboratory technicians working in all industry sectors.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Perform scientific calculations
  • 1.1 Ensure raw data are consistent with expectations and reasonable ranges
  • 1.2 Calculate scientific quantities involving algebraic, power, exponential and/or logarithmic functions
  • 1.3 Ensure calculated quantities are consistent with estimations
  • 1.4 Present results using the appropriate units, uncertainties and number of significant figures
2 Analyse trends and relationships in data
  • 2.1 Determine linear and non-linear relationships between sets of data
  • 2.2 Prepare and analyse control charts to determine if a process is in control
  • 2.3 Identify possible causes for out-of-control condition
  • 2.4 Follow workplace procedures to return process to in-control operation
3 Determine variation and/or uncertainty in data distributions
  • 3.1 Organise raw data into appropriate frequency distributions
  • 3.2 Calculate means, medians, modes, ranges and standard deviations for ungrouped and grouped data
  • 3.3 Interpret frequency distributions to determine the characteristics of the sample or population
  • 3.4 Calculate standard deviations and confidence limits for means and replicates
  • 3.5 Estimate the uncertainty in measurements using statistical analysis
  • 3.6 Determine data acceptability using statistical tests and workplace procedures
4 Check for aberrant results
  • 4.1 Identify results that cannot be reconciled with sample, sample documentation, testing procedures and/or expected outcomes
  • 4.2 Determine appropriate actions in consultation with supervisor
5 Report results
  • 5.1 Use charts, tables and graphs to present results in the required format
  • 5.2 Verify that entry of data and results are correct
  • 5.3 Prepare reports and records in a format and style consistent with their intended use and workplace guidelines
  • 5.4 Communicate results within the specified time and in accordance with workplace confidentiality and security guidelines
No information
No information
Replaces
State Code National Code Title Type
AWO57 MSL925001 Analyse data and report results Unit of competency
Replaced By
State Code National Code Title Type
OEX98 MSL925006 Analyse data and report results Unit of competency