Unit of competency Outline

Date retreived
22/07/2026 9:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform electronic/electrical assembly (production)

Perform electronic/electrical assembly (production)

Unit of competency
National Code
MEM03004
State Code
OAX38
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
24/01/2020
Nominal Hours
72
Description
This unit of competency defines the skills and knowledge required to identify and assemble electronic/electrical components and to test the assembled components for conformance to job sheets/specifications. It includes the use of automatic wave soldering machines.Where the selection and use soldering skills is required unit MEM05001 Perform manual soldering/desoldering - electrical/electronic components and unit MEM05002 Perform high reliability soldering and desoldering, should also be selected as appropriate.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of manual handling is required unit MEM11011 Undertake manual handling should also be selected.Where the selection and use of measurement skills is required unit MEM12002 Perform electrical/electronic measurement should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 8
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Select assembly equipment
  • 2.1 Select assembly equipment and use in accordance with instructions or job sheets to SOPs
  • 2.2 Use equipment in a safe manner according to SOPs
3 Identify electronic/electrical components
  • 3.1 Identify common name, appearance, and colour of electronic and electrical components
  • 3.2 Identify polarity indicators on components
4 Assemble components
  • 4.1 Select correct components by code/colour or other identification methods
  • 4.2 Prepare components/devices for soldering or other termination methods
  • 4.3 Connect cables to a variety of plug and socket combinations, as required
  • 4.4 Handle and store components safely using appropriate anti-static handling procedures and techniques in accordance with procedures
  • 4.5 Produce assembly following correct sequence of operations
No information
No information
Replaces
State Code National Code Title Type
W5268 MEM03004B Perform electronic/electrical assembly (production) Unit of competency