Unit of competency Outline
Date retreived
23/07/2026 3:11 AM AWST
23/07/2026 3:11 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Match direct gloss solid paint colour on vehicles or components
Match direct gloss solid paint colour on vehicles or components
Unit of competency
National Code
AURVTP115
AURVTP115
State Code
OCI83
OCI83
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
31/03/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to match vehicle or component direct gloss solid paint colours using original equipment manufacturer (OEM) paint codes. This unit involves preparing for the task, selecting and using specialist tools and equipment, identifying paint codes, preparing colour matching test cards, mixing and spraying paint and conducting a visual colour match, and completing workplace processes and documentation.The unit applies to those working in the automotive refinishing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1 Identify job requirements from workplace instructions
- 1.2 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
- 1.3 Identify tools, equipment and chemicals required for repair activity and establish serviceability according to workplace procedures
2. Mix direct gloss solid paint colours
- 2.1 Set up and operate paint mixing system according to manufacturer specifications and workplace procedures
- 2.2 Mix paint according to manufacturer specifications, approved colour matching method, workplace procedures, workplace health and safety and environmental requirements
3. Prepare colour test card and perform visual matching
- 3.1 Prepare and spray colour matching test cards according to workplace procedures
- 3.2 Carry out visual matching, make comparisons between matched and original paint, and record paint codes according to workplace procedures, OEM paint codes, workplace health and safety and environmental requirements
- 3.3 Remix paint for further matching prior to application if first mix does not match original paint
4. Complete work processes
- 4.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWZ40 | AURVTP015 | Match direct gloss solid paint colour on vehicles or components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGA9 | AUR32420 | Certificate III in Automotive Refinishing Technology | Qualification |