Unit of competency Outline

Date retreived
23/07/2026 4:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean vehicle underbody

Clean vehicle underbody

Unit of competency
National Code
AURVTN010
State Code
AWZ85
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
039909 - Cleaning
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to wash, clean and dry a vehicle underbody and its components. It involves preparing for the task, selecting and using cleaning equipment, cleaning products and materials, protecting underbody components during cleaning process, and completing workplace processes and documentation.It applies to those working in the automotive detailing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to clean vehicle underbody
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted
  • 1.3 Cleaning materials are selected, inspected for quality and suitability, and required quantities are calculated
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle
2. Wash and clean vehicle underbody
  • 2.1 Cleaning tools, equipment and underbody component protective products are used according to workplace procedures and safety and environmental requirements
  • 2.2 Vehicle underbody and components are washed and cleaned according to manufacturer recommended methods, and without causing damage to vehicle’s electrical or mechanical components or systems
  • 2.3 Washing and cleaning are completed according to customer requirements, workplace procedures, and safety and environmental requirements
3. Dry vehicle underbody components
  • 3.1 Drying processes and equipment are selected and used according to workplace procedures and customer requirements
  • 3.2 Vehicle underbody and components are dried according to workplace procedures, manufacturer recommended methods and customer requirements, and without causing damage to system or components
  • 3.3 Vehicle unit and system components are inspected and tested to ensure normal operation after the washing and drying process
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF493 AURVTN2010 Clean vehicle underbody Unit of competency