Unit of competency Outline

Date retreived
21/07/2026 11:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct recreational vehicle predelivery checks

Conduct recreational vehicle predelivery checks

Unit of competency
National Code
MSMRV387
State Code
OFD37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/02/2023
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
030503 - Vehicle Mechanics
Original Release Date
24/05/2023
Nominal Hours
15
Description
This unit describes the skills and knowledge required to conduct predelivery checks on a serviced, repaired or modified recreational vehicle before being returned to the customer.The unit applies to a person working in a recreational vehicle service and repair facility who undertakes routine tasks according to work instructions, plans/specifications and procedures and uses discretion and judgement in selecting equipment, services or contingency measures. They work with a high degree of self-direction and limited supervision. They apply known solutions to routine problems and report non-routine problems according to procedures. They are responsible for their output and have limited responsibility for the output of others.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to conduct the predelivery checks
  • 1.1 Identify the scope of work and work undertaken from job instructions and workplace documents
  • 1.2 Verify that all in-scope works are completed
  • 1.3 Identify the predelivery checks applicable to the completed works
  • 1.4 Select and check all required tools and equipment are ready to use
  • 1.5 Identify hazards and hazard controls and check the hazard controls are in place and operating
  • 1.6 Check the recreational vehicle and work area are ready to conduct the predelivery checks
  • 2.1 Conduct predelivery checks applicable to the completed works
  • 2.1 Conduct predelivery checks applicable to the completed works
  • 2.2 Rectify any deficiencies according to quality requirements and workplace procedures
  • 2.3 Reapply relevant checks to ensure rectifications and adjustments adequately address failures on previous checks
  • 2.4 Inspect the recreational vehicle inside and out for cleanliness and presentation and rectify any deficiencies
3. Complete predelivery documentation
  • 3.1 Ensure necessary utility certificates are completed
  • 3.2 Document any future service, repair or modification recommendations or requirements according to workplace procedures
  • 3.3 Complete task outcome documentation required to release the recreational vehicle
No information
No information
Replaces
State Code National Code Title Type
AWC45 MSMRV363 Complete pre-delivery check of a recreational vehicle Unit of competency