Unit of competency Outline

Date retreived
22/07/2026 8:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake tool store procedures

Undertake tool store procedures

Unit of competency
National Code
MEM11019
State Code
OAV53
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to order, receive, maintain and distribute permanent or disposable tooling and specialist tools and associated consumable items used in engineering applications and environments from a specialist store or warehouse.Where interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify tools/tooling requirements and consolidate from order documentation and liaise with trade and production personnel according to SOPs
2 Order and receive tools/tooling
  • 2.1 Identify appropriate tools/tooling from supplier catalogues and manuals, including correct size, hardness and quality
  • 2.2 Place order according SOPs
  • 2.3 Receive orders from main receival warehouse or direct from supplier
  • 2.4 Unpack orders and place stock in correct location
  • 2.5 Check items and confirm against order
  • 2.6 Process incorrect items according to SOPs
3 Maintain and distribute tools/tooling
  • 3.1 Clean tools/tooling and protect, as required
  • 3.2 Monitor supplies to ensure maintenance of contingency stock
  • 3.3 Issue tools/tooling to users according to SOPs
  • 3.4 Follow enterprise documentation procedures
  • 3.5 Establish and follow procedures against unauthorised use of tools/tooling
No information
No information
Replaces
State Code National Code Title Type
W5474 MEM11019B Undertake tool store procedures Unit of competency