Unit of competency Outline

Date retreived
23/07/2026 10:26 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dock boards using computer programmed machinery

Dock boards using computer programmed machinery

Unit of competency
National Code
TLIW2024
State Code
AWL16
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
29/02/2016
View on TGA
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/08/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to dock boards using computer programmed machinery, in accordance with regulations and workplace procedures and specifications as part of pallet manufacturing processes in the transport and logistics industry.It includes preparing and operating computer-programmed machinery to dock boards to specifications, monitoring and rectifying processing operations as required, and completing operations in accordance with workplace requirements. Work is generally performed under some supervision, within a team/group environment. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare computer programmed machinery to dock boards
  • 1.1 Appropriate work health and safety (WHS)/occupational health and safety (OHS) and other regulatory procedures are followed
  • 1.2 Hazards are identified, risks are assessed and control measures are implemented
  • 1.3 Job requirements regarding sizes and lengths are obtained from standards
  • 1.4 Start-up checks are completed in accordance with workplace procedures
  • 1.5 General cross-section, length and condition of boards on conveyor are visually assessed in accordance with workplace quality standards
  • 1.6 Program to cut requirements is selected from a range of available programs
  • 1.7 Program is loaded and machine cycle is checked
  • 1.8 Need for new programs is identified and reported to supervisor
  • 1.9 Communication with supervisor and other workers is maintained to ensure efficient workflow
2 Operate programmed machinery to dock boards
  • 2.1 Trial boards are cut to check process and output
  • 2.2 Machinery is operated to dock timber to specification
  • 2.3 Reject boards are identified and directed for disposal or recovery
  • 2.4 Faults/problems with materials or componentry are identified and appropriate action is taken in accordance with workplace procedures
3 Monitor and rectify processing operations as required
  • 3.1 Dimensions and finish of cut boards are regularly checked in accordance with workplace standard procedures
  • 3.2 Sawing process is adjusted to maintain accurate sizing
  • 3.3 Feed systems are regularly monitored for material flow problems
  • 3.4 Minor feed problems are cleared in accordance with equipment manufacturer instructions
  • 3.5 Characteristics of blunt and damaged saws are recognised and appropriate action is taken to rectify identified problem/s in accordance with workplace procedures
  • 3.6 Saw blades are removed and replaced in accordance with workplace procedures
  • 3.7 Work area is regularly cleaned in accordance with workplace procedures
4 Complete operations
  • 4.1 Machine shut down is conducted in accordance with workplace and manufacturer guidelines
  • 4.2 Boards are relocated to holding area without damage to boards, personnel or equipment
  • 4.3 Waste materials are directed for disposal or recovery
  • 4.4 Production records are completed in accordance with workplace procedures
  • 4.5 Maintenance program is completed as required and recorded in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
D5376 TLIW2024A Dock boards using computer programmed machinery Unit of competency
State Code National Code Title Type
AZP5 TLI31616 Certificate III in Warehousing Operations Qualification