Unit of competency Outline

Date retreived
23/07/2026 11:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut panels

Cut panels

Unit of competency
National Code
FWPWPP2213
State Code
OCR30
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/12/2020
View on TGA
State Implementation and Classification
Approved Date
07/04/2021
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
07/04/2021
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to cut panels to size with a power-driven saw. The unit includes preparing for work, using a power-driven saw to cut materials to size, and performing routine operator maintenance.The unit applies to individuals who cut panels in a forest and wood products manufacturing setting.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cutting
  • 1.1 Determine job requirements from work order or instruction and, where required, seek clarification from appropriate person
  • 1.2 Confirm safety and environmental requirements for the task according to workplace safety procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with using a power-driven saw
  • 1.4 Plan cutting patterns and saw set-up sequences according to workplace procedures
  • 1.5 Consult with team members and other appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Locate saw and other support equipment needed for the work, and check for correct operation and safety
  • 1.7 Select, fit and use personal protective equipment
  • 1.8 Conduct pre-start-up checks of saw to determine serviceability according to manufacturer instructions
2. Cut material to size or angle
  • 2.1 Use equipment according to workplace safety procedures, manufacturer instructions and environmental requirements
  • 2.2 Mark up material and set stops in preparation for cutting
  • 2.3 Follow cutting sequence and patterns to produce required quantity
  • 2.4 Check cuts for length and angle within set tolerances
  • 2.5 Dispose of incorrect cuts, offcuts and defective material according to workplace and environmental requirements
  • 2.6 Stack material safely in designated location according to workplace procedures
3. Complete operator maintenance
  • 3.1 Lock out, clean and maintain fixed saw according to manufacturer recommendations and workplace procedures
  • 3.2 Check saw blades for bluntness or damage
  • 3.3 Remove and replace saw blades according to manufacturer recommendations
  • 3.4 Dispose of used blades according to workplace and environmental requirements
  • 3.5 Keep machine clear of dust and debris according to workplace safety procedures
  • 3.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate person
No information
No information
Replaces
State Code National Code Title Type
AXJ51 FWPWPP2201 Cut panels Unit of competency
Replaced By
State Code National Code Title Type
OFD28 FWPCOT2268 Cut timber or engineered wood product to length or dimensions Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification
BAK9 FWP20416 Certificate II in Wood Panel Products Qualification