Unit of competency Outline

Date retreived
22/07/2026 7:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dismantle and re-assemble furniture for upholstering

Dismantle and re-assemble furniture for upholstering

Unit of competency
National Code
MSFUP2006
State Code
WI666
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040311 - Carpentry And Joinery
Original Release Date
19/06/2014
Nominal Hours
48
Description
This unit of competency covers dismantling and re-assembling furniture and/or fittings for the purposes of fitting and/or refurbishing upholstery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Item to be dismantled is inspected and components identified
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Work required, including the process/order for dismantling according to the workplace procedures, is identified
  • 1.4 Tools and equipment are selected and checked for safe and effective operation for the task
2 Dismantle furniture
  • 2.1 Items to be dismantled are identified
  • 2.2 Items are dismantled to the extent required in the work instructions using appropriate tools and procedures
  • 2.3 Any previous upholstery is noted for wear, condition and application techniques
  • 2.4 Fasteners and attachments are removed and stored
  • 2.5 Component parts are separated, tagged and stored following workplace procedures
  • 2.6 Component parts are despatched to the next process according to workplace procedures
3 Re-assemble furniture
  • 3.1 Items to be re-assembled are identified
  • 3.2 Items are re-assembled to the extent required in the work instructions using appropriate tools and procedures
  • 3.3 Upholstered components are noted for the security and condition of the upholstered fittings
  • 3.4 Fasteners and attachments are selected and used according to workplace procedures
  • 3.5 Assembled piece is despatched to the next process according to workplace procedures
4 Complete work
  • 4.1 Equipment used is cleaned, inspected for serviceable condition and stored in accordance with workplace procedures
  • 4.2 Equipment faults are identified, tagged and reported to appropriate personnel
  • 4.3 Work area is cleaned and returned to operational condition
No information
No information
Replaces
State Code National Code Title Type
W8810 LMFUP2006B Dismantle/reassemble furniture for upholstering Unit of competency
Replaced By
State Code National Code Title Type
OEJ88 MSFUP2012 Dismantle and reassemble furniture for upholstering Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J735 MSF30713 Certificate III in Upholstery Qualification