Unit of competency Outline

Date retreived
23/07/2026 12:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and operate automated workflow

Set up and operate automated workflow

Unit of competency
National Code
ICPPP484C
State Code
D3152
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/07/2010
View on TGA
State Implementation and Classification
Approved Date
10/09/2014
Field of Education
030103 - Printing
Original Release Date
10/09/2014
Nominal Hours
60
Description
This unit describes the performance outcomes, skills and knowledge required to set up and operate an automated workflow to produce a print ready file.
Notes
Elements and Performance Criteria
1. Check job files and perform pre-flight
  • 1.1. All details required for the job are checked and confirmed against job specifications
  • 1.2. Files are loaded and all file resources are checked to determine if file is ready for production
  • 1.3. File format is identified and best method of submission is chosen
  • 1.4. Missing fonts are, where available, embedded and image data optimised, cropped and/or compressed if necessary
  • 1.5. Hairlines are thickened to a minimum width, if necessary
  • 1.6. Layout images are assigned as high resolution data and down sampled
  • 1.7. Thumbnails are generated for viewing pages
2. Create portable job ticket format processors
  • 2.1. Parameters for individual elements or steps for all phases of the job are defined
  • 2.2. All phases of the job are sequenced according to the workflow and enterprise processes
  • 2.3. If necessary access levels are set for operators
  • 2.4. The workflow definition is reviewed and saved
3. Transform colours
  • 3.1. Assigned colour libraries are checked for consistency and colour names are converted if inconsistency is present
  • 3.2. Spot colours are converted to process colours where necessary
  • 3.3. Output colours are matched to colours input using selected ICC profile
  • 3.4. Colours are set for the final proof output
4. Set trapping parameters
  • 4.1. The portable job ticket format trapping settings are used and additional trapping requirements are added where appropriate
  • 4.2. Traps are viewed and checked in the file
  • 4.3. If necessary traps are edited, removed or replaced
  • 4.4. An appropriate separation-capable proof is viewed to ensure that the separations will output as expected
5. Proof pages
  • 5.1. An imposition plan is assigned to the job
  • 5.2. A form proof from the plotter is printed containing all printer marks and signature marks are viewed for final checking
  • 5.3. Pages are outputted on a page proofer and checked
  • 5.4. Any required changes are made and proof is approved by client
6. Prepare for output
  • 6.1. Jobs to be imaged are outputted to film or plate
  • 6.2. CIP3/CIP4 data is captured and dealt with according to enterprise procedures
  • 6.3. Information for the presetting of cutting and folding machines is generated if required and plug-ins are available
  • 6.4. The Print Production Format files are exported to or saved for the print console and outputted for plate or film imaging
  • 6.5. Job data is saved and archived as required
  • 6.6. Documentation is signed off according to enterprise procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
File resources may include:
fonts
high-resolution images.
File format may include:
PP
EPS
PDF
PS
TIFF
JPEG.
Separation-capable proof may include:
should meet client requirements and enterprise and industry standards.
Separation may include:
VPS
Spectrum
InSite or Prinergy's Separation Viewer plug-in for Adobe Acrobat.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
setting up and operating an automated workflow to produce a print ready file
demonstrate an ability to find and use information relevant to the task from a variety of information sources
set up and operate an automated workflow to produce TWO different print ready files
evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment
automated workflow software.

Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.
Replaces
State Code National Code Title Type
D0414 ICPPP484B Set up and operate automated workflow Unit of competency
Replaced By
State Code National Code Title Type
AUP09 ICPPRP484 Set up and operate automated workflow Unit of competency