Unit of competency Outline
Date retreived
23/07/2026 6:41 AM AWST
23/07/2026 6:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Identify and correct mechanical faults in loom and other weaving equipment
Identify and correct mechanical faults in loom and other weaving equipment
Unit of competency
National Code
LMTTX3019A
LMTTX3019A
State Code
W7532
W7532
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
24/10/2014
Nominal Hours
50
Description
This unit covers the skills and knowledge required to identify and correct mechanical faults in weaving looms and related weaving equipment.
Notes
Elements and Performance Criteria
1 Determine the cause of loom or related weaving equipment breakdowns
- 1.1 Operator is consulted on loom operation and condition prior to breakdown
- 1.2 Visual check is made of the loom and woven product for any obvious damage or faulty mechanical components
- 1.3 Fault finding skills are used to determine cause of loom breakdown
- 1.4 Loom engineering drawings, product specifications and operation manual are consulted where necessary
2 Solve mechanical loom and related weaving equipment problems
- 2.1 Gauges and tools are used correctly to adjust machine and in accordance with OHS practices
- 2.2 Parts are dismantled and assessed for disposal, reconditioning or continued use
- 2.3 Parts are reconditioned, where required including any needed grinding, milling or turning
- 2.4 Replacement parts are fitted and/or adjusted and tested in accordance with manufacturer specifications and workplace requirements
- 2.5 Loom or related weaving equipment is checked for correct operation after repair
- 2.6 Operator is advised of any special requirements as a consequence of the repair
3 Overhaul and recondition weaving looms and related weaving equipment
- 3.1 Loom condition assessed and estimated schedule of work to be performed prepared
- 3.2 Loom and related equipment overhauls are carried out in accordance with manufacturer specifications and workplace requirements
- 3.3 Parts are reconditioned, where required, including any needed grinding, milling or turning
- 3.4 Loom or related weaving equipment is checked for correct operation at end of overhaul
4 Maintain records
- 4.1 Records are maintained and reports prepared, where necessary
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Woven product may include may include
broadloom and narrowloom carpets
apparel
terry towelling
furnishing and upholstery fabrics
woven industrial products
woven healthcare products
Product specifications may include may include
quality name
pile height
beat-up
width
weaving construction (pattern)
Gauges and tools may include
hand and power tools
analogue and digital measuring equipment
grinders
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Woven product may include may include
broadloom and narrowloom carpets
apparel
terry towelling
furnishing and upholstery fabrics
woven industrial products
woven healthcare products
Product specifications may include may include
quality name
pile height
beat-up
width
weaving construction (pattern)
Gauges and tools may include
hand and power tools
analogue and digital measuring equipment
grinders
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
interpret appropriate documentation including where necessary standard operating procedures, loom and related equipment specifications, operating guidelines, workshop manuals and technical drawings
determine the condition of parts
identify faults and determine appropriate repair strategies
set loom correctly
operate loom safely and correctly
perform sample runs
make appropriate readjustments
apply workplace health and safety policies in production operations
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent Assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
interpret appropriate documentation including where necessary standard operating procedures, loom and related equipment specifications, operating guidelines, workshop manuals and technical drawings
determine the condition of parts
identify faults and determine appropriate repair strategies
set loom correctly
operate loom safely and correctly
perform sample runs
make appropriate readjustments
apply workplace health and safety policies in production operations
maintain accurate records
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent Assessment
This unit may be assessed independently or in combination with other relevant units.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAU13 | MSTTX3012 | Identify and deal with mechanical and low voltage electrical faults in textile machinery | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |
| W368 | LMT30107 | Certificate III in Textile Production | Qualification |
| W380 | LMT40107 | Certificate IV in Textile Technology and Production | Qualification |
| W392 | LMT50407 | Diploma of Textile Technology and Production Management | Qualification |