Unit of competency Outline

Date retreived
22/07/2026 9:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Develop, trial and evaluate prototypes

Develop, trial and evaluate prototypes

Unit of competency
National Code
MSFFT5008
State Code
WI469
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
20/06/2014
Nominal Hours
108
Description
This unit of competency covers developing specifications, identifying and selecting materials and processes, production trialling of prototypes and completing evaluation documentation. Prototypes may be produced by hand, by using appropriate machines, tools and equipment or by computer-assisted production.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Develop prototype specifications
  • 1.1 The purpose and outline requirements for the prototype are identified from design concepts and/or customer requirements
  • 1.2 Materials are identified following detailed analysis of the options
  • 1.3 Detailed prototype design specifications are prepared and documented
  • 1.4 Construction requirements and methods are identified appropriate for the materials to be used
  • 1.5 Ergonomic requirements are identified, clarified and satisfied throughout the work process
2 Plan and prepare prototype construction
  • 2.1 Work plan for the prototype construction is drafted
  • 2.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 2.3 Compatibility of materials in specifications is checked and any discrepancies reported
  • 2.4 Steps or stages in construction are identified, noting checkpoints for quality checks
  • 2.5 Suitable work area is located and cleared ready for work
  • 2.6 Materials and consumables to meet specifications are prepared for use
  • 2.7 Equipment and accessories suitable for working the specified material are prepared for use
  • 2.8 Appropriate jigs and other construction aids are identified and where required adjusted to suit the work
3 Produce the prototype
  • 3.1 Work plan is followed to produce the prototype
  • 3.2 Checks are conducted at the identified points
  • 3.3 Modifications to designs and plans are identified and recommended and managed within workplace procedures
  • 3.4 Modifications to the plan are documented and followed
  • 3.5 Prototype or sample is checked for compliance with specifications
4 Trial and evaluate the prototype
  • 4.1 Trial objectives and processes are developed, specified and documented
  • 4.2 Personnel involved in the trial and evaluation are prepared for their responsibilities and functions
  • 4.3 Trial equipment, tools and materials are prepared and certified prior to use
  • 4.4 Prototype trials are conducted and results captured and recorded in accordance with the trial specification
  • 4.5 Results of trials are evaluated and evaluation records and recommendations are processed in accordance with enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
W8657 LMFFT5011B Develop, trial and evaluate prototypes Unit of competency
Replaced By
State Code National Code Title Type
ODZ45 MSFFDM5007 Develop, trial and evaluate prototypes Unit of competency
State Code National Code Title Type
J731 MSF50313 Diploma of Furniture Design and Technology Qualification