Unit of competency Outline
Date retreived
23/07/2026 4:50 PM AWST
23/07/2026 4:50 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate and manage aircraft systems
Operate and manage aircraft systems
Unit of competency
National Code
AVIW5018A
AVIW5018A
State Code
WB836
WB836
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
21/03/2013
Field of Education
031505 - Aircraft Operation
Original Release Date
21/03/2013
Nominal Hours
40
Description
This unit involves the skills and knowledge required to operate as pilot-in-command of an aircraft during visual, instrument and night conditions. This includes operating and managing aircraft systems, sub-systems (equipment) and devices. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1Operate and manage aircraft systems during normal flight
- 1.1 Aircraft systems, sub-systems (equipment) and devices applicable to the aircraft type are operated in accordance with manufacturer's Pilot Operator's Handbook(POH)/Flight Manual and company operations manual
- 1.2 Aircraft systems, sub-systems (equipment) and devices are monitored using a systematic scan technique
- 1.3 Aircraft systems and flight environment information is analysed to identify actual and potential threats or errors
- 1.4 Automated aircraft systems are utilised to manage cockpit workload
- 1.5 Checklist procedures are completed as appropriate to the aircraft system
2Manage aircraft systems during abnormal and emergency procedures
- 2.1 Non-normal or emergency situations are recognised
- 2.2 Aircraft control is maintained
- 2.3 Affected aircraft system is identified and confirmed
- 2.4 From memory, recall items are stated and performed in accordance manufacturer's Pilot Operator's Handbook(POH)/Flight Manual or company operations manual
- 2.5 Appropriate non-normal or emergency procedures are performed in accordance with relevant workplace and emergency procedures and regulatory requirements
- 2.6 Course of action is decided, implemented, evaluated and revised to achieve safest outcomes
- 2.7 Location and operation of emergency systems applicable to aircraft type are demonstrated and explained
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Tasks may be undertaken in:
VFR
NVFR
IMC
VMC with simulated IMC conditions
Performance may be demonstrated in:
single engine aircraft
multi engine aircraft
synthetic training device approved by the relevant authority
variable air traffic conditions
variable weather conditions
variable flight situations
abnormal situations
classes of airspace as designated by the Civil Aviation Safety Authority
Aircraft may include:
fixed wing
helicopter
other commercial or military aircraft
Crew may include:
single pilot
multi crew
Instruments may be:
flight instruments suitable flight
head up display suitable flight
Limitations may be imposed by:
local noise abatement requirements and curfews
airspace endorsements
Classes of airspace may be:
as designated by the regulator
restricted and danger areas
military control zones
Air Defence Identification Zones
Conditions may include:
a method of simulating IMC
simulated icing conditions
moderate turbulence
simulated hazardous weather
Autopilot/Flight Director
FMS/other NAV system
simulation of emergency and abnormal procedures
Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
standard operating procedures
Information/documents may include:
relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
Flight Manual/Pilot's Operating Handbook (POH)
Manual of Standards - Pilot Licensing (MOS-PL)
Aeronautical Information Publication (AIP)
En Route Supplement Australia (ERSA)
charts
operations manuals
approved checklists
workplace procedures and instructions and job specification
induction and training materials
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
relevant Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
relevant Australian Standards
Performance includes tolerances specified in either of:
relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:
Manual of Standards
relevant Defence documentation such as:
Defence Orders and Instructions
approved curricula and training documentation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Tasks may be undertaken in:
VFR
NVFR
IMC
VMC with simulated IMC conditions
Performance may be demonstrated in:
single engine aircraft
multi engine aircraft
synthetic training device approved by the relevant authority
variable air traffic conditions
variable weather conditions
variable flight situations
abnormal situations
classes of airspace as designated by the Civil Aviation Safety Authority
Aircraft may include:
fixed wing
helicopter
other commercial or military aircraft
Crew may include:
single pilot
multi crew
Instruments may be:
flight instruments suitable flight
head up display suitable flight
Limitations may be imposed by:
local noise abatement requirements and curfews
airspace endorsements
Classes of airspace may be:
as designated by the regulator
restricted and danger areas
military control zones
Air Defence Identification Zones
Conditions may include:
a method of simulating IMC
simulated icing conditions
moderate turbulence
simulated hazardous weather
Autopilot/Flight Director
FMS/other NAV system
simulation of emergency and abnormal procedures
Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
standard operating procedures
Information/documents may include:
relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
Flight Manual/Pilot's Operating Handbook (POH)
Manual of Standards - Pilot Licensing (MOS-PL)
Aeronautical Information Publication (AIP)
En Route Supplement Australia (ERSA)
charts
operations manuals
approved checklists
workplace procedures and instructions and job specification
induction and training materials
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
relevant Civil Aviation Safety Regulations and Civil Aviation Orders
in Defence context, relevant Defence Orders and Instructions
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
relevant Australian Standards
Performance includes tolerances specified in either of:
relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:
Manual of Standards
relevant Defence documentation such as:
Defence Orders and Instructions
approved curricula and training documentation
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S6836 | AVI5W1808A | Operate and manage aircraft systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVX45 | AVIW5018 | Operate and manage aircraft systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S635 | AVI50408 | Diploma of Aviation (Instrument Flight Operations) | Qualification |