Unit of competency Outline

Date retreived
23/07/2026 6:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit off sprinkler heads, controls and ancillary equipment

Fit off sprinkler heads, controls and ancillary equipment

Unit of competency
National Code
CPCPFS3045
State Code
OCO21
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040327 - Plumbing
Original Release Date
01/06/2021
Nominal Hours
24
Description
This unit of competency specifies the skills and knowledge required to install sprinkler heads, system controls and ancillary equipment for sprinkler fire protection systems. The installation involves work on a new and existing structure.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Identify installation requirements.
  • 1.1 Obtain, read and apply sprinkler head and control requirements from relevant job plans and specifications, codes, Australian Standards, manufacturer’s specifications and jurisdictional requirements.
  • 1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.
  • 1.3 Identify class of sprinkler system and associated design data from system design specifications.
2 Prepare for work.
  • 2.1 Create a materials list and collect materials.
  • 2.2 Select and check the serviceability of appropriate tools, equipment and personal protective equipment (PPE).
  • 2.3 Select components and prepare work area to support efficient installation of sprinkler heads, system controls and ancillary equipment.
3 Install sprinkler heads and ancillary equipment.
  • 3.1 Set out system following plans, specifications and job instructions.
  • 3.2 Attach fixings and pipe supports.
  • 3.3 Install sprinkler heads, system components and ancillary equipment.
  • 3.4 Isolate system and drain it down to allow connection without causing water damage, then recharge when altering existing systems.
  • 3.5 Complete documentation following quality and work requirements.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
  • 4.2 Clean tools and equipment, check for serviceability and report any damage, and store and secure.
No information
No information
Replaces
State Code National Code Title Type
WI768 CPCPFS3045A Fit off sprinkler heads, controls and ancillary equipment Unit of competency
State Code National Code Title Type
BGC1 CPC32820 Certificate III in Fire Protection Qualification