Unit of competency Outline

Date retreived
23/07/2026 6:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform general milling operations

Perform general milling operations

Unit of competency
National Code
FBPSUG2028
State Code
OAL68
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/04/2019
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to carry out general milling operations. It excludes the use of dividing heads and CNC mills. Typical operations include slotting and cutting flats.The unit applies to individuals who work under supervision in the sugar milling industry. All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for milling operations
  • 1.1 Identify milling requirements according to job specifications
  • 1.2 Select, fit and use personal protective equipment according to health and safety procedures
  • 1.3 Collect and prepare materials to be drilled
  • 1.4 Set up milling equipment for operation according to operating procedures
  • 1.5 Conduct pre-operational equipment checks according to operating procedures
  • 1.6 Identify and report health and safety hazards and machine damage or faults according to health and safety procedures
2. Operate milling equipment to achieve specifications
  • 2.1 Set machining parameters to meet job requirements
  • 2.2 Position and clamp materials for milling operation according to operating procedures
  • 2.3 Start, operate and shut down milling equipment according to operating procedures
  • 2.4 Identify non-conforming components against specification, and correct as required
  • 2.5 Undertake basic routine operational maintenance according to operating procedures
  • 2.6 Ensure the work area is maintained to meet workplace cleaning standards
No information
No information
Replaces
State Code National Code Title Type
WD858 FDFSUG228A Perform general milling operations Unit of competency