Unit of competency Outline

Date retreived
23/07/2026 1:11 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct brick and block structures and features

Construct brick and block structures and features

Unit of competency
National Code
AHCLSC312
State Code
ODV16
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
31/05/2022
Nominal Hours
90
Description
This unit of competency describes the skills and knowledge required to construct brick structures and features or block structures and features, or both as a component of landscape project works, including preparing for work, setting out and preparing site, constructing structure or feature, checking and cleaning up site.The unit applies to individuals who construct brick and block structures and features under broad direction, and take responsibility for their own work and for the quality of the work of others.State/territory licensing, legislative or certification requirements apply in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Interpret site plans and specifications
  • 1.2 Identify potential hazards and risks, and implement safe working practices to manage risks
  • 1.3 Check the quantity and quality of materials
  • 1.4 Select tools, equipment and machinery required for construction work and check for safe operation
  • 1.5 Select, fit, use and maintain personal protective equipment (PPE) applicable to the task
  • 1.6 Implement suitable control strategies for environmental problems relating to brick and block construction work
2. Set out and prepare the site
  • 2.1 Determine, locate and mark out services from site plan where applicable
  • 2.2 Mark out position of structure or feature according to site plans
  • 2.3 Establish profiles to conform to nominated tolerances
3. Construct structure or feature
  • 3.1 Mix mortar to determined ratio and add bonding, colouring agents and other appropriate admixes if required in accordance with specifications
  • 3.2 Lay damp proofing if required
  • 3.3 Establish base course of brick or block work to achieve final level heights
  • 3.4 Lay courses of brick or block work using designated bonds in a manner that will ensure viability and stability of structure
  • 3.5 Cut bricks or blocks using mechanical and hand cut method
  • 3.6 Apply finishes to brick or block work
  • 3.7 Apply waterproofing according to site plans and specifications
  • 3.8 Install drainage systems according to site plans and specifications
4. Check quality of work and clean-up site
  • 4.1 Inspect quality of finished works to ensure standard of finished structure or feature has been achieved
  • 4.2 Clean down brick or block work surfaces in an environmentally safe and sensitive manner
  • 4.3 Clean, maintain and store tools and equipment
  • 4.4 Identify and report unserviceable tools and equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAQ62 AHCLSC303 Construct brick and block structures and features Unit of competency