Unit of competency Outline

Date retreived
23/07/2026 12:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design plantations

Design plantations

Unit of competency
National Code
FPIFGM4203B
State Code
D6010
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/05/2011
View on TGA
State Implementation and Classification
Approved Date
08/06/2011
Field of Education
050501 - Forestry Studies
Original Release Date
08/06/2011
Nominal Hours
90
Description
This unit describes the outcomes required to design a plantation or monoculture. The unit also applies to an area that is to be used for multiple uses, such as farm forestryGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPIFGM4203A Design plantations
Notes
Elements and Performance Criteria
1. Prepare plantation design
  • 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to plantation design are identified and followed
  • 1.2. Site environmental protection measures are identified and adhered to in line with relevant legislation and regulations
  • 1.3. Relevant plans are reviewed and analysed to assess impacts on plantation planning
  • 1.4. Consultative processes are used to obtain input into the design in line with site requirements
  • 1.5. Plantation requirements and location are identified from organisational maps, plans and strategies in line with site procedures and environmental requirements
  • 1.6. Measurable performance indicators, specifications and targets are developed and documented in line with organisational procedures
2. Design components of plantation
  • 2.1. Necessary surveys are specified and tolerances determined in line with organisational procedures and environmental requirements
  • 2.2. Site preparation techniques are identified in line with site parameters and organisational procedures
  • 2.3. Design components are identified and approvals obtained in line with organisational plans, policies and parameters of site, and environmental requirements
  • 2.4. Design plan and performance indicators are clearly communicated to appropriate personnel
3. Review plantation design
  • 3.1. Plantation data and documentation are analysed against plans and adjacent plantations in line with organisational procedures
  • 3.2. Recommendations are prepared and design improvements implemented in line with organisational procedures and environmental requirements
  • 3.3. Plantation design processes are recorded and reported to the appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
S4675 FPIFGM4203A Design plantations Unit of competency
Replaced By
State Code National Code Title Type
WG897 FPIFGM4203C Design plantations Unit of competency
State Code National Code Title Type
S487 FPI50105 Diploma of Forest and Forest Products Qualification