Unit of competency Outline

Date retreived
23/07/2026 6:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare concrete sub-floors using wet cleaning methods

Prepare concrete sub-floors using wet cleaning methods

Unit of competency
National Code
MSFFL2008
State Code
WI338
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
039909 - Cleaning
Original Release Date
19/06/2014
Nominal Hours
32
Description
This unit of competency covers wet cleaning concrete sub-floors using high and low pressure water cleaning applications relating to sub-floor preparation.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Identify wet cleaning operations
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to the application of wet cleaning methods are verified and complied with
  • 1.2 Types of wet cleaning equipment and their functions are identified from relevant information sources and Australian Standards
  • 1.3 Sources of power supply are recognised
2 Select wet cleaning method
  • 2.1 Wet cleaning method, equipment and attachments are selected consistent with the needs of the job
  • 2.2 Wet cleaning equipment is checked for serviceability and safety and any faults are corrected or processed for repair
  • 2.3 Sequence of work is planned to ensure efficiency and quality of sub-floor cleaning
3 Prepare sub-floor for cleaning
  • 3.1 Appropriate personal protective equipment is selected, correctly fitted and used
  • 3.2 Fittings and fixtures are removed from the sub-floor
  • 3.3 Sub-floor is cleared of loose debris and dirt, and cleaned
  • 3.4 A safe flooring technology work environment is established and maintained
4 Clean the floor
  • 4.1 The start point is established and work plan implemented
  • 4.2 Perimeter is cleaned using appropriate method and equipment
  • 4.3 Main area is cleaned to the required standard using the most appropriate available equipment in accordance with manufacturer specifications
  • 4.4 Floor area is inspected and re-worked as required
5 Complete housekeeping
  • 5.1 Tools and equipment are cleaned and stored appropriately
  • 5.2 Work area is cleaned and rubbish disposed of appropriately
  • 5.3 Workplace documentation is completed
No information
No information
No information
State Code National Code Title Type
J736 MSF30813 Certificate III in Flooring Technology Qualification
J725 MSF20113 Certificate II in Furnishing Qualification