Unit of competency Outline

Date retreived
23/07/2026 9:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out non-structural vehicle panel repairs

Carry out non-structural vehicle panel repairs

Unit of competency
National Code
AURVTN002
State Code
AWZ93
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to perform non-structural vehicle panel repairs to pre-paint condition. It involves preparing for the task, selecting and using specialist tools and equipment, repairing panels according to manufacturer specifications and workplace procedures, and completing workplace processes and documentation.It applies to those working in the automotive body service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for non-structural panel repairs
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and product manufacturer and original equipment manufacturer (OEM) specifications are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Equipment and hand and power tools are selected and checked for serviceability
  • 1.5 Work is planned to minimise waste according to workplace procedures
2. Carry out non-structural panel repairs to pre-paint condition
  • 2.1 Panels are repaired using approved repair methods, materials and equipment according to OEM specifications and safety and environmental requirements
  • 2.2 Repairs are finished to pre-paint condition according to workplace procedures
  • 2.3 Advice is sought from appropriate personnel if repair interferes with the vehicle’s trim or electrical and mechanical systems
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF485 AURVTN2002 Carry out panel repairs Unit of competency
Replaced By
State Code National Code Title Type
OCL90 AURVTN102 Carry out non-structural vehicle panel repairs Unit of competency