Unit of competency Outline

Date retreived
24/07/2026 5:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Measure trees

Measure trees

Unit of competency
National Code
FWPSIL2005
State Code
ODS01
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
050501 - Forestry Studies
Original Release Date
21/06/2022
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to measure trees, identify tree characteristics and abnormalities and record data on tree measurements, characteristics and abnormalities.The unit applies to individuals who are involved in measuring trees as part of forestry operations. All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for measuring trees
  • 1.1 Determine job requirements from work order or instruction, and where required seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental requirements, including use of personal protective equipment, for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with measuring trees
  • 1.4 Identify emergency and evacuation procedures to follow in the event of an incident or accident
  • 1.5 Consult with appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Select tools, measuring equipment and materials, and check for serviceability according to workplace procedures
2. Perform tree measurements and record data on tree measurements, characteristics and abnormalities
  • 2.1 Locate forest or plot area from map or plan
  • 2.2 Confirm tree measuring requirements including required measuring tools and equipment
  • 2.3 Calculate stand height according to sampling technique
  • 2.4 Measure log volume and length
  • 2.5 Determine diameter and girth over or under bark at breast height and ground level
  • 2.6 Classify stem form or crown class
  • 2.7 Check and record tree measurements according to workplace procedures
  • 2.8 Identify, assess and record tree abnormalities according to workplace procedures
  • 2.9. Clean, maintain and store measuring tools equipment
No information
No information
Replaces
State Code National Code Title Type
AXK75 FWPFGM2215 Measure trees Unit of competency
State Code National Code Title Type
BHL8 FWP20121 Certificate II in Forest Operations Qualification
BHK9 FWP20122 Certificate II in Forest Operations Qualification