Unit of competency Outline

Date retreived
22/07/2026 11:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Process glass by basic machines

Process glass by basic machines

Unit of competency
National Code
MSFGG2015
State Code
OAJ25
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
22/05/2019
Nominal Hours
45
Description
This unit describes the skills and knowledge required to shape, drill and edge annealed glass using basic machines involving hand-held and static processes. This unit applies to glass processing workers and glaziers.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements
  • 1.1 Read work instructions and identify job requirements
  • 1.2 Identify and follow work health and safety requirements, using all required personal protective equipment
  • 1.3 Select and check required tools, equipment and materials for serviceability and safety prior to use
  • 1.4 Plan sequence of work to ensure processing is conducted in a logical order
2. Prepare for work
  • 2.1 Select glass processing table and clear work surface of debris and dust
  • 2.2 Clear work area of obstructions and potential hazards
  • 2.3 Check glass for imperfections and damage prior to handling
  • 2.4 Relocate glass to be processed in the work area using appropriate handling techniques
  • 2.5 Accurately measure glass to minimise waste in accordance with workplace standards
  • 2.6 Identify and test components and controls of machines, including emergency stops and guards and take appropriate action if not in working order
3. Conduct processing operations
  • 3.1 Operate and monitor tools and equipment in accordance with manufacturer instructions and workplace procedures to achieve correct product quality and output within specified tolerances
  • 3.2 Make routine equipment, tool lubrication and adjustments in accordance with manufacturer instructions
  • 3.3 Identify and report problems to appropriate persons, and follow any authorised changes in working procedures
  • 3.4 Inspect completed product for compliance with quality and work requirements and repair, reprocess or discard in accordance with workplace procedures
4. Complete work
  • 4.1 Label and store processed glass in accordance with workplace procedures ensuring there are no projections
  • 4.2 Clean work area, safely dispose of rubbish and identify items for recycling in accordance with workplace procedures
  • 4.3 Remove and store tools, equipment and unused materials in accordance with workplace procedures
  • 4.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI479 MSFGG2007 Process glass by basic machines Unit of competency