Unit of competency Outline

Date retreived
23/07/2026 2:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit and adjust bicycle accessories

Fit and adjust bicycle accessories

Unit of competency
National Code
AURB232265B
State Code
D7568
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to fit and adjust electrical and non-electrical bicycle accessories.It requires the ability to understand specifications and use tools and equipment to fit and adjust bicycle accessories to Australian standards.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Check and confirm customer requirements in accordance with workplace procedures
  • 1.2. Research bicycle accessory fitting requirements and check specifications and applicable standards
  • 1.3. Check tooling and equipment prior to use, for availability and conformity with specifications and safe condition
  • 1.4. Determine condition of accessories by inspection and measurement and compare with bicycle accessory specifications and customer use requirements
2. Remove bicycle accessories
  • 2.1. Plan removal sequence
  • 2.2. Remove accessories without causing damage to frame or other components or accessories
  • 2.3. Process removed accessories for repair or disposal in accordance with workplace procedures
3. Fit, test and adjust bicycle accessories
  • 3.1. Determine correct positioning of accessories with regard to operational requirements and aesthetics
  • 3.2. Fit bicycle accessories according to plan using personal safety equipment and precautions to protect others in the workplace
  • 3.3. Handle and use tooling and equipment in accordance with occupational health and safety (OHS) requirements
  • 3.4. Operate fitted bicycle accessories through full range, noting test results, including non-conformity
  • 3.5. Check fitted bicycle accessories, complete adjustments, and prepare unit for delivery
4. Complete work and clean up
  • 4.1. Store portable tooling and equipment in approved designated areas
  • 4.2. Update workplace records, customer file and warranty information as required by enterprise
  • 4.3. Clean up work area and dispose of waste in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2812 AURB232265A Remove, replace, fit and adjust bicycle accessories Unit of competency
Replaced By
State Code National Code Title Type
WF063 AURBTV2001 Fit and adjust bicycle accessories Unit of competency
State Code National Code Title Type
W220 AUR31005 Certificate III in Automotive Sales Qualification
D540 AUR30211 Certificate III in Bicycles Qualification
D536 AUR20311 Certificate II in Bicycles Qualification